The Jalopy Journal
Thanks for posting pics. I was there for the first time and really enjoyed the show. A lot of cars and a great variety.
Powder coated mine. Would recommend it.
[ATTACH] Here's mine before the interior.
great pics, thanks for sharing.
Hey Bob, thanks for starting the post.
I talked to Karen this evening. The doctors are going to try and close his chest tomorrow and start waking...
No, didn't have to do anything. After I welded the race, I turned the steering box over, and after it cooled the race was sitting on the garage floor.
I welded a small bead inside the race, once the weld cooled the race fell out.
Nice start, can't wait to see the finish. Thanks for sharing.
40 thru 47 tapered shafts are the same. I just used a 47 steering shaft with a 39 banjo wheel. Not sure on the trucks.
I was wanting to do the same thing. It is hard to find a roadster dash that is in tact. I used an oval that was cut out of another dash. Any oval...
The horn button has four tabs that you need to straighten. After you get that out there is a copper inner piece that is crimped to the stainless...
Sell it, NOS oil has to be worth something.
Not a ford. 39s banjos are tapered and have a fret on the spokes. Looks like a british wheel.
Nice pics. Thanks for sharing.
I received my new gauges last year with the temp gauge needle laying in the bottom of the gauge. I was able to fix it, but why does everything...
Great pics, thanks for sharing.
Flying out thursday with a friend. Was out there for the PC3G and the SoCal grand openings and hadn't been back since until last year. Can't...
Welcome from Missouri. Are we going to see a build thread on your 3w?
Welcome from Missouri. Good luck with the project.
Do you have enough left of the original to copy? If so I can handle that for you.
After you rule out the cooling system, double check your timing. It can also cause the engine to run hot. Good Luck.
That is Jim Houstons coupe. It was featured in rod and custom late last year or early this year.
I'm building a flat motor for my roadster and it is expensive. I would pull the flathead, slip in a cheap small block. When things get better...
Saw your coupe at the roadster show. Very nice.
Got a chance to see the hot rod and meet Jimmy. Jimmy's a great guy and his skills are even better. The truck looked great in the raw and awsome...
Looks like a good day to me. Wish I was there!
If you want to make a change, use a '30 or '31. The car is bitchin.
The show is a good teaser. I want more!!!
When he took on the other job, did he at least work longer days and weekends to compensate? If not, I would let him finish and don't use him...
Separate names with a comma.