The Jalopy Journal
I had a similar problem on my stock willys Coupe. The fuel would dry out back to the tank and the mechanical pump had trouble picking it up. I...
Put a thin sheet of rubber under it to get it working quicker
Does anyone here have any experience running con rod and main bearing nuts other than castellated nuts and split pins?
Looking good we will see you at the Nats?
How is the certification going? Just asking for a friend
Car Craft 1961. Hot Rod magazines were not easy to come by then but my Mother put it on her monthly order at the magazine shop.
Thanks for the kind offer 37 Gas but I am in New Zealand, certainly an option if nothing else happens
Thanks Bryan that would be great
Has anyone here ever adapted a different fuel pump to a model B engine? I can't find an original core to rebuild and don't like the noise of an...
Hi all I have a friend who is building an A roadster hiboy, he has 30 A cowl and doors and 29
quarters, we realise that they do not match but no...
Do you have a link to the other thread with the chop you mentioned?
I have one to do.
Replace the whole wire, if you weld it is a weak spot and likely to crack again
I used penrite in my F100 steering box, great product no leaks
Bryan, makes me wonder if they are a Ford product at all, could be sedan fenders off a late 20's early 30's Chev or similar.
The roadster is mine the tub is a project, we are in virus lock down at the moment so I will get some time in on it.
Yes thats a buick, it has just been repowered with a Red Ram
Here are some photos taken at a movie shoot in our town. The movie ' The Kiwi Flier ' was about kids and a trolley race. Our club was asked to...
A bit hard to see in this photo but my side curtains are similar to the post above but around the screen and header is red duct tape, works very...
After your welding you will probably have some pitts to deal with, you can get the job copper plated then fill the
pitts with a high tensile...
No need to put it in water etc use a small flame and start away from the job at a distance, just enough heat to melt your solder. Tin all surfaces...
Thanks for the replies guys, I changed to an external drive years ago but was looking out to tidy up the stuff
photo bucket had put on us. I will...
On one of my posts the photos have gone and have been replaced with red crosses. Does anyone have
a fix for this? The photos show up when you...
I do have a build thread on my avatar but the pictures have also been deleted by photo bucket. I will have to repair this as well. Do you have a...
I did'nt realise the pics had been wiped, must be photobucket, I will sort it out after Xmas,
Body lead or body solder is 70/30 ie 70% lead 30% tin as is Plumbers lead or as we knew it, Wiping metal.
Normal solder used for soldering...
I have brazed heaps of cast iron manifolds works well and does not melt.
I have also tig welded it with stainless steel rod.
There was a good article I think in Street Rodder magazine years ago where a guy made a new set for a 34 phaeton
out of stainless steel and...
Separate names with a comma.