The Jalopy Journal
31 Vicky with a hemi has got the right way to check it
it serve as cooling and vibiration control-
Before removing main caps and rod caps make sure they are numbered.they MUST go back on the same way they came off.
Really clean ground connections make life easier!
Used a painless on my 57 Chevy - I think I'll try another brand on my ford
Maybe leaking around kick down cable
Put new shoes on too- if the old one is wet it'll grab-
Find a gravel road and get someone to watch the wheels. Hit the brakes and see which one slides.
Number 8 is right above the starter ! Chance of big fire so let it air out awhile and keep a fire extinguisher handy. Sounds like the float is...
Heck, I don't own a tv- don't want one. Too much other stuff to do. Hard to believe this is still open!
Kinda sounds like a cam lobe going away -maybe dist cap has carbon tracking. Is it getting any worse? Has the motor been wet? Moisture can cause...
Something's locked the rearend up- maybe?i would jack up the rearend and see if the rear wheels will move back and forth-
Be very careful - the Spring is under tension and will come flying out. If you're putting new springs in just cut the old ones out with a torch.
Springs gotta be in backwards. Unless its haunted!! Yikes!
I would pull the trans pan and check it for metal- and what kinda car?
56 years old here- all the guys I hang around with are older than me. But I can pickup a lot of info from em!
Looks like its doing a strip tease! Take it all off!
I would plug off the back at the master cylinder - see if the brake pedal is better . Isolate the system and find if it is frt or rear brakes...
Heck , I'd buy it - put a seat , steering and other odd and ends - strip down city!
That flywheel milling sounds like a good idea
Wooden clothes pins has the traditional look and work good too!
Find the local barber shop - probably someone would there could help
Good info here
If you don't have a positive traction rear end !! Jack up right rear wheel and get in car and slowly run it up to 55 mph on the jack . Making sure...
Hey modelacrazy would your pickup be a gow job?
Thanks for the response guys . I learned something on the hamb again!
I'm not very familiar with the term" gow job " is it the same as a custom ?
What Sam said ^^^
Separate names with a comma.