The Jalopy Journal
I know this is an old thread.
I see the splines started in 48-49, What year did they end? I don't know what year steering wheel to be looking for.
Thanks to all who replied, I took the bones to a friend that has a mill. I hate to ask for help like that but I was afraid I wouldn't be happy...
Look how thick the 36 is up top.
I don't have a mill so this is going to be done with a band saw or a grinder, or both. The reason I was going to cut the bones is because the...
I've got a good dropped model A axle, 2-1/4 boss and a good 36 wishbone, made for 2" boss. What is the best way to make these two fit together?...
I can't help you with those questions but ask the other 347, I might have an answer for one of those. lol
Just for touch ups on epoxy primer. They sputter at the beginning of a spray sometimes but then start to atomize pretty good. Pretty cheap too.
I don't know how much time you dedicate to your project a week but that chassis would cut a year or more off my build time. How much is your...
In the past I have stacked 2 seals on the same side. I don't why there was room for both but there was. Maybe some seals are narrower than others.
[ATTACH] Wilwood # 9109209 maybe. $100.00 shipped to lower 48.
[ATTACH] Wilwood # 91029986 Maybe. Set your brake bias without a proportioning valve. $175 shipped to lower 48, no tax.
36" clevises and rod ends included at this price. I have no idea what shipping will be but they are pretty heavy. [ATTACH]
I guess you could try that Mr. Primer, but it might work better to hit the little reply button on the top left and send an email.
That's probably why they are still available.
It could be worse... you could be Jake, from State Farm.
I like them on street rods. Always have.
I ended up paying $125 out the door for 2 - 4x8 sheets of 18ga. Not too bad.
And about the tariffs, sometimes you have to step back and take...
I'm waiting on a couple more quotes. I'll let y'all know.
I was quoted $90.00 for a 4x10 sheet of cold rolled 18Ga. Is that about right? Seems steep to me.
Separate names with a comma.