The Jalopy Journal
The narrowest factory 9" axle at 57.25" drum-to-drum. The only year with the smooth pumpkin rear face. Big bearing version from a retractable...
I've been reminded that I still have this stuff, so I'm bumping the ad.
Like new copies of "Street Rodder" magazine from 1997 on through 2016. Several complete year sets. Over 160 pieces.
NO shipping or individual...
Added front bumper.
There is a small car hood and deck lid in Pomfret Center, Connectictut. Need to have them brought to S.E. Michigan (i.e. Detroit) or somewhere...
New price (was $225)!!
Not to upset the big tire gasser fans, but THAT'S the way I would like a Willys coupe.
This suspension was used in my '47 convertible when it was built 20 years ago. It needed a floor pan redo above the GM crossmember to get it all...
I am looking for recommendations for a conscientious, quality body and paint location in Southeast Michigan, somewhere in the Detroit metro area...
Fram Filcron canister filter assembly. SOLD
A 221 or 260 (except Tiger) will have 2 freeze plugs per block side. 289 and later (and Tiger 260) had 3 per side.
Undropped original 1937 - 1941 axle that's been nicely drilled on a CNC mill. Straight and clean. Price plus shipping.
I suppose a flat rubber washer/seal would help, as long as it doesn't block the overflow pipe.
I believe those are for the smaller 'A' size neck.
The pickup uses the smaller ID cap, for the 'A' size neck. Pass cars thru 1948 use the 'B' size neck. Just can't find one with a seal deeper...
The NAPA in your note is BK 7031419 which they cross to a Stant 10281. I have one, but it reaches only 3/4" into the neck and won't provide a...
Ordering is always on option, but walking in and buying one locally is the question. Perhaps the correct part will cross to a newer application,...
This is driving me nuts. I want to walk into Carquest, NAPA, etc. and buy a radiator cap, but without a part number they are lost. It would be a...
How about a Ecoboost 2.3L and trans from a 2015 Mustang. 310 HP and compact. Find an insurance salvage wreck.
The Robert Roeder '34 Ford. Started life as a cabriolet.
Isn't he in Farmington? Does good work at a good price.
FORD 427 / 390 FE camshaft - marine REVERSE rotation (solid lifter) - $100
1936 Ford stock leaf springs - $30 each (front or rear)
1946 - 1948...
Are you actually going to Detroit, or one of the suburbs? Big difference!
Any ways, The Henry Ford / Greenfield Village is great but pricey (I...
Way back, reading the Rodders Roundtable forum they said 'stay away' from the HAMB site (bad people were there), so of coarse I had to look!
What are some good dimensions for a 5 window to judge (with the glass installed) how much the top has been chopped from stock? Perhaps windshield...
Separate names with a comma.