The Jalopy Journal
'39 what headlights to fit on a '40 what?
Do you want us to guess what you're talking about?
Or do you actually know what make cars you are...
If.... I had to use a two post lift, I would extend the landing plates about 12" on both sides of the post using 1" thick steel, welded on. Then...
There is a Yale Road running east of Vancouver, BC.
'51 Ford painted the same dark blue as my '05 Dodge Magnum wagon.
It appears to have some work done around the hood and grill.
There would be no reason to remove the regulator.
It helps hold the window up and in place. Take a window winder handle off the front door and...
I just measured my '51 and a '66 T-Bird.
They are both close to 57 inches inside.
There is a '64 Bird being scrapped here and I like the interior....
Has anyone installed 1964...1966 Ford T-Bird seats in a 1951 Ford?
If so, was it much work to do so?
The modern day world is now using newton metres.
This is an oldie.
John Greer from Hamilton, Ontario.
I did a lot of work on this.
Tube frame, 394 Olds, etc.
Wayne Hennings from Stoney Creek, Ontario built this.[ATTACH]
A guy walks in to a lawyers office.
"How much do you charge to answer two questions?"
Lawyer says..."Five hundred...
Did it originate in Tonawanda NY?
Corky Hibbard comes to mind.
Most of you have seen this one.
It's a long term project.
What powers a Tesla car?
These things should be put through a test before being put on the market.
This is a '66 Cruiser. It was built in Hamilton,ON and sold new here in Victoria, BC.
It was sitting in a garage for 12 years. 230 c.i. Chev.
That Wells Thermo sealer looks something like carpet layers use to glue the seams.
WTF is a chebby?
My '51 Vicky that got away on me while moving it.
No real damage. Just a small bed in the lip that hides behind the rear bumper.
That burn pile...
The picture of the back of the car shows the difference between wheels and rims.
Hmmm... flat tire on the front, huge tire on the rear. Looks like pinstriping where the license plate goes. The tail lights look slightly...
I made a small adaptor ring from 4" pipe. About 5/16" thick if I remember
Have you had the frame checked for square?
I saw an article where some one drilled holes through the stand to insert a hardened pin.
The holes lined up with the teeth when the load was on....
I heard that the car went to the same people as the original Captain America Easy Rider bike
Maybe the term should be ... "Used good".
Separate names with a comma.