The Jalopy Journal
What i do to remove check valves is to soak it really good, place two drill bits that fits real nice in two of the holes of the check valve in the...
Great effort! the 30-31 cabs are very good looking when done right, i wanted to be very moderate with mine, only 2".
It was close to as bad as...
1930-31 hood, i cut the ugly lower lip of about 3/4" below the belt line and folded it inwards, nice and rigid too.
[ATTACH] [ATTACH] [ATTACH]
I had the same problem with my Gemsa powered 30 Pu, i wanted to be able to pull the cover easily, besides the engine looked strange tilted way to...
[ATTACH] Southern Norway.
To remove the bezel i usually make a tiny slot in the case with a tiny rotating file, dentist style, then tig weld back to a tight press fit, and...
Ok so here it is, Morales-Gemsa head on model B, 600 miles road test.
B bottom, two 97s, Scintilla magneto, custom one-off asymetrical cam,...
1944 Ford GPW, i was 8, my dad who restored the car in 1973 teached me by letting me drive through the woods one summer night after we had...
Help! Having problems finding a top water hose, 33-36 V8 water pump and stock B ratiator, slight increase in diameter and slight bend. What do you...
Great info! I will contact those guys!
Need to know all the diameter dimentions on the cams, center to center on lobes and bearings, standard follower diameter.
Could also use some...
Having run into a strange project i could need some cam related info and help from someone with a big Offy 220-255-270, or cam experts with...
I sent you an of topic PM.
Here is one i have.
I will pull the Original pre-war Rutherford Winfield intake down and check volume and spacing, the log itself is 2 1/2" OD with quite deep dead...
I`m getting closer to build my own log type intake for an 8 port.
I do have two older log type intakes from Gemsa and one for...
Very good carburetor with good flow, atomization, adjustability and looks. looks to be intact also.
Hope you run it!
Kim, for Model A/B, Flathead V8 and Jeep engine i use Dynocat, avalable in europe and with zink and it works really well. Swepco is also very good...
Haha yeah must be a rocket scientist right? :)
Sent from my SM-G920F using The H.A.M.B. mobile app
Jason, the 2" ones in the intitial pictures have both adjustable idle and intermidiate circut`s.
Great story! Thanks man!
What car is this for? this is original 1929 intructions for Model A Ford.
Envelope with german invasion stamps, valuable back then (507.40 Kr) registered mail 1943. Found in Model A Tudor in Norway.
Separate names with a comma.