The Jalopy Journal
No preference at all, the only reason mine is a 30 is because it's the first coupe I found that ticked the right boxes.
Great looking truck but sometimes you just gotta let go.
Thanks Steve and Ned, both your answers combine to make sense to a question I've ponderd for a long time.
Beanscoot I think that the 4 speeds...
The Doug Nash 5+1 had a direct 5th so you could use a rear end in the 2.xx's and still have good low end acceleration, but no mechanical losses in...
Good question. I've always thought it might be a sales gimmick.
I'm new to flap disks so I don't have any experience for comparison but I've been happy with canadian tire disks.
You would want to check the manufacturers instructions.
Allow outdoor instillation.
Maxjax. Its more money but more versatile, designed for a low ceiling, and ALI certified.
I ordered the fittings from summit last Wednesday and they arrived this morning (pretty good service over a long weekend)
I'm happy I did, not...
Who knows, weatherhead fittings may be superior to what's available locally.
I've ordered the ss fittings if only for my piece of mind.
Thanks, my search skills have always been poor.
Thanks my search didn't bring this up.
Lol, I did spend 35 years as a gas fitter but I did leave my 24" wrench in my tool box. I was using my 6" flare nut wrench's? I tried creeping up...
Like the title says I'm looking for a steel or ss adapter for my residual pressure valves. I find that the brass ones that are easily...
From what your describing I would question the pedal ratio, but that would be hard to change. You might see if you could get front brake cylinders...
If you don't mind me asking, nose art on what?
Unfortunately the only thing you find on there website is is a listing for their caps at $24.50 each, of course this is before exchange,...
I've got a walker c-487-2 cobra rad in my model A and I want to go down to the local parts place and pick up the pressure cap...
The long bar has 50/50 on it so it's probably solder, 50% tin, 50% lead.
The inside area of the 2" pipes are 3.14" each and the area of the 2.5 pipe is 9.62 so unless the are a lot of elbows in the pipe 2.5...
I have no specific information on that valve but there would have to be a way for the coolant or air to get Back in the system or a partial...
I was referring to a general chart, one that list torque by fastener size and thread pitch.
I always use anti seize, you are supposed to ajust your torque value down to compensate for the lubricant. Most torque charts give the...
Where did you get your carb bases?
A longer pitman arm will turn the front wheels further.
I used these boxing plates. I had welded in nuts where I knew I needed bolts but I still had access when some plans evolved. It wasn't...
On my ot sports car the mount is lower than almost every bodys shoulder, in an accident there is going to be some compression of your...
Separate names with a comma.