The Jalopy Journal
I am the guy who defended Charlie Price (Vintage Speed) through the years. My dealings with Charlie have always been good. We chatted at Hershey,...
E-brake mount from Ed Lloyd's shop. Had it powder coated red before I changed my mind. The green one is from his shop ad. $100 shipped....
When I was building my Cadillac powered roadster I purchased two '57 Cadillac engines. One to build and one for parts I might need. This is the...
I like to use 3/4 cold rolled and add DD to the ends on the Bridgeport. I don't care for the look of[ATTACH] lengths of DD shaft. Ron
Perhaps it was me. Ron [ATTACH] [ATTACH]
Had to trim all fins on Buick drums for wheel fit [ATTACH] on my QC. Ron
This is on Ebay:...
Looking for an update. Ron
I sent my oil pump to EGGE and they rebuilt it without the vacuum pump.
I'd also like to know if the later, non vacuum, oil pump will...
[ATTACH] [ATTACH] I used the '32 posts on my '30 A. You must gouge out the area shown. If you're running a top the top irons don't fit the '32...
Satisfied customer sent picture of his installation along with thanks![ATTACH]
Thought this might help someone. Long ago I looked on the HAMB for information on what water pump pulley to use on my '57 Cadillac engine. Found...
Thanks Pete, my only end goal is to learn the length of the original '32 FORD V8 torque tube and the length of the original V8 drive shaft....
What I need are dimensions (length) of a stock '32 FORD model 18 (V8) torque tube and drive shaft. Appreciate the help, Ron
That guy with me is my Dad. Here is his hot B powered '30 A. Ron[ATTACH]
Gomez, followed your instruction. Relocated pin, plugged unneeded hole and assembled. Appreciate it, Ron
Separate names with a comma.