The Jalopy Journal
If using a 1959 Ford 9" rear with adaptor plates for the KH wheel bolt pattern are the spacer plates still required? I would think the adaptors...
I appreciate the work done for sure, but love the deuce tudor lines as is..
Lots to absorb around here, welcome aboard.
Looking great, know you'll be happy motoring these Fall leaf days in NH!
Rock and Roll, and Hot Rods will never die!
I have an old firewall with a good band if you are interested, PM me.
They have Rustoleum at the two stores that shop..
Tractor Supply has the Paint in gallons and the harder, checked yesterday here in Alabama.
Can be a real complicated problem to find!
Been there, the bad hose will also keep that side from releasing as well!
What ever happened to the purchase plan? I too am in the process of getting a 40 delivery, this thread has helped with all the advice..
I built a forty tudor years ago before the MII craze, used a 54 Chevy frontend and MG rack, big mistake. Fortunately I saved all the original...
I'm in the same boat with my 32 tudor, thanks for posting the plan of attack!
The only thing between you and a slick sedan is air and opportunity..
Sent a PM for a frame on Parts Classified to you, good luck!
I would seriously think about new outer rails or even find a better original frame before trying to fix the rusted portions of your outers. There...
Great story on a legendary hot rod, thanks for sharing the history of the car and yours and your uncles past with the 34. Best of luck with the...
Got the same problem with my tudor, plan on epoxy to glue to sheet metal with props until it dries.
Great job, thanks for sharing the project pictures during build phase. I wouldn't worry much about how long it took, I've been collecting parts on...
I'm in Vincent, about 45 minutes East of Birmingham.
These posts are really spot on for me at this time. I also have a truck 8ba that I'm using in my 32 tudor project that I'll be taking apart. Great...
What's happening with your tudor project?
I'm wondering if your plan will work on my tudor roof wood the same way. It was pretty well gone when I got the body, mostly with the metal...
I used a flattened 40 Ford rear crossmember with a 40 reversed eye front spring and 36 rear bones on my 32 tudor, 9" 59 ford rearend.
Love the car but, can you introduce yourself bud!
Welcome to the board from Vincent Al. Always good to get another homeboy on here!
Put two lower patch panels from Howell on both doors on the sedan today, rust never slept on this body!
What a way to start a New Year! Love those 33 tudors..
Separate names with a comma.