The Jalopy Journal
A little off topic but i have been balancing mower blades on a nail for 50 years and they ar e just fine
I have a VW switch that has lasted 48 years
For those of you that may be interested here is my Last Refuge body finally getting ready for paint it has been an interesting build[ATTACH]...
I have a 727 Torqueflite that would work I used 2 in my last builds and they are bullet proof and in Ohio
Bought a set of diamond hole saws (cheap) on ebay for the hell of it and they work on glass just run under water and cuts surprisingly fast
If there was a little market for these I can get them made but my pal would probably want to make a 100 or so to make it worth while
If anyone is interested I have a small block 727 for sale
My avatar is a 1927 Dodge Brothers with a 300 HP 360 mopar with a 727 and 8" rear end You can get an easy 300 HP from the 340 and it is tough as...
choppy444 please send me your email I have a small thing you can help me with
Lee Pendelton in Ashtabula Ohio seems to have bought all of Arfons engines for his sidewinder puller. I saw Art Arfons in his first Green Monster...
Back in the 50's we would chase one all over town when spotted thinking it was a customized Ford
What is the number of that color
Not to hijack he post but I have a Last Refuge body with bear claws which are fine but I have no room to install dove tails I need a way to align...
I suspect its fuel percolation my Mopar 360 4 bbl Edelbrock Perfirmer manifold did it Had to put on a thick carb insulator and it did the trick...
x2 my 270 Dodge had two holes in the block you need to pressure test the block
Went Saturday big crowd lots of vendors and almost No masks maybe one in a thousand or two
I was taught to use ATF for that problem in 1956 when my new Chevy had a lifter noise been using it ever since
Its the new impatient generation they wont wait for anything
Selling for a friend If any interest I can supply pics
Has anybody found 1/8 cunefer tubing I looked all over Google no luck I do like the idea of stainless though
If the going gets tough - keep going
Oregon Cam did a great job on my hemi cam
Not a Rupp
All the hitnmiss engines used them. 1893 Patent date is correct. My pal has dozens of them on engines and machines at his shop and collection....
Got bored a couple years ago and this Mitsubishi Silver Pigeon. Couldn't find a Cushman. Now I can't find a buyer for this
My avatar is exactly the same as what you have. If I had to do it over again I would do a Mustang 2. I adapted a dropped tube axle, special built,...
Didn't have fenders, had to make them out of trailer fenders[ATTACH]
I recently built an off topic vehicle and stored it for two months. It wouldn't start and upon examination the carb adjusting screw had corroded...
After having to buy four blocks and machining two that I had to scrap to get a good one for my hemi, I would just order a guaranteed machined...
Separate names with a comma.