The Jalopy Journal
1929 the best looking front fender ever made imo
I sold my 1927 Tall T coupe, and bought a 1946 Ford long door coupe.
Anyone have a picture of the bottom side of your hood,showing the place where the safety latch hooks? I think 46 thru 48 would be the same.
What transmission are you going to use? I would at least put the bellhousing on.
I saw this coming last week. when I got a e-mail survey about the Fall Meet. Its too bad, and will most likely hurt the event in the coming years....
Granite 6 & 12 volt maintainer charger 12 watt also
I am very happy with both,I use the granite on my AGM batterys
If your t bird is 3 speed overdrive, 12 volts will also burn out your transmission solenoid.
I will never buy a car car without a title again. Also cars that are titled as a antique and are heavily modified.
[ATTACH] I removed the relay. Cleaned the points, and all connections . Installed relay. Works now.
I also installed a Pertronix .
I bench tested the solenoid by putting a fully charged 6 volt battery to the blue wire and grounding the case . Strong action by the solenoid.
I have searched and have not found the answer I need.
1955 Thunderbird 3 speed overdrive.
I have benched tested the solenoid , tests good....
Lots of events in Western Pa. I also go into Ohio, West Virginia, and New York.
Check out a web site called Big Al's List for show ,swap meets etc.
Part it out , and start over
Just in case it snows in north west Pa. next week. We loaded today for Detroit
What rear gear are you running?
Newport ,works with windshield out, duel wipers , two speed .works great It is not cheap
I solved by changing to a lighter step up spring. They are color coded
I am using a Ford Racing short water pump, v belt, Walker Rad, mechanical fan
Tanks Inc. Or shops that sell chopper parts[ATTACH]
Two more[ATTACH] [ATTACH]
the caps on the tanks are spring loaded. I take off the outer caps. on push the gas nosel thru the spring loaded cap on the tank I do have to fill...
I will look for a picture of the splash apron with the filler neck welded in. I take the gas cap off ,put gas hose thru the neck and into the push...
I used the push thru fillers on my tanks, and welded fake filler necks with Harley gas caps in my splash aprons. Works great.
All the folks from Singlefinger have gone out of there way to help
Welcome , waiting for pics
Separate names with a comma.