The Jalopy Journal
Jim I can't get the points plate off....&$^#
Hey all...I have a wore out vertex magneto that I am wanting to run it as just a points distributor, that way I can use the MSD boxes that I have....
I would put the Johnny joints at the front of the triangulated bars, no bind and more flex in suspension.
Thanks Mike....How would you plum it in..M
I have a SBC engine that I am putting together, with a GMC 671 Blower this setup is for the street only, I also had a custom rad, shroud, and fan...
Hey Jethro, could we get some pic's of that install. I need to do the same thing, Thanks Mike
I bought the DVD from Dean Blowers on how to rebuild the 6v71 6v92 8v71 8v92 series, So far I have spent about 3 hours trying to open it, I...
Thank you all...much appreciate Mike
Sorry Mike..When I went through the instructions from Vertex, I did not see anything on how a Buzz Box works or how to hook it up
could someone tell me how to time it using a buzz box.
I bought a Vertex mag and tack, And I know nothing about mags. I bought it for the size to go behind a 671. Could someone tell me how to time a...
I'm with you...
Can you tell me more, I am running a Denso because I don't have much room...thanks
Yea, That's right I am DONE with HEI. I have a 38 Plymouth coupe with a slant six that moves right along. Every year there a HEI problem, or...
I have a pair of 650 Holley with vacuum secondary's
As title says also street only
I have a hot plate and warm up the snout and pressed out the bearing...Thanks
I am trying to take apart my blower snout to have it powder coated, I have removed the back snap ring, is that it ? and press out the front seal &...
both ends and front hub, carb plate
As the thread ask ?
No..that one will not work..Sorry
Wait...I am think that a box off a Dodge from the 70's might work, aluminum box. I have one somewhere, let me have a look.
Jeeps have front steering using a 525 box, with drag ling steering.
I need to make a sling for re & re my motor, with a blower on top.
Pictures would be great.
Performance Improvements speed shop
OK Guys Sorry it took so long to reply.....This is a street motor only. my cam shaft is only good for 8 psi of boost.
I will never see the track,...
Separate names with a comma.