The Jalopy Journal
Looks like a great time!! Got the invite in hand. Hope the weather cooperates!
Sent from my iPhone using The H.A.M.B. mobile app
Welcome from Wichita!
The 55 Chevy is realy a nice car. Bob builds some quality cars.
I used the stock riser and cut a piece of 3/4 plywood for the base. Opened up two holes about the size of your butt and then used lawn chair...
Changed oil in the Roadster & stuck in a new set of plugs!
These cars are all in VERY bad shape!!! No reason for any of you guys to come to Kansas. L.O.L.
I use ONLY a vein type pump. If its a pulsating pump it will push past the needle and seat. I also set the fuel regulator at 2-3 PSI
welcome from kansas
Not built to my taste but I admire the craftsmanship and attention to detail. Then consider it was built in the Midwest. I like to see all kinds...
I bought mine new and took it home and put oil in it and did't pay any attention to the directions on breaking it in. Turned it on and went to...
First timer here! Looking forward to the event. None refundable Hotel already booked and registration paid!
Thanks for pictures!
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
sounds like the Bendix is locked. Take it off the motor and you should find the problem.
Almostdone I agree completely. I always wear mine and any passenger also does in my roadster. I always tell them I want to keep everything in one...
Great Hot Rod!!
Just sent my paper work this morning. I haven't been to this show for about 30 years. I have pictures of showing there at the old Fonner Park...
Welcome! Looks like you have done some home work. I used the same drive line in my roadster. Definitely get the Vern Tardel Book and stay close to...
Sioux Plating does a great Job!
It's been almost a month since I have had a chance to stir the gears. Tomorrow morning Grandson and I are going for breakfast and a short drive!
GREAT A!!!! I like the attention to detail!
Jump over on the Ford Barn. They can help www.fordbarn.com
My Flathead with a pair of Stromberg's will run just fine on either type of gas but certainly likes the real stuff better. Stromberg carbs will...
Add some timing!
I was planning on going to Texas to Good guys show but thinking of scratching that and heading up! This certainly looks like more fun!!
I used an old oil pump and plumbed it into the rear oil galley and used my electric drill. Pumped about 2 gallon of oil throughout the whole...
Wind catches my 29 pretty badly. Put that with Bias Ply tires and it makes you pay attention. Most of the time I just drop the road speed a little...
welcome from Wichita!
Great Job! Keep them coming!!
Separate names with a comma.