The Jalopy Journal
Hello guys. Not a subscriber to Street Scene anymore but does anyone have an idea of what vendors might show up? Or how were the vendors last...
Underdash is pretty handy. No duct work or nothing to impede efficiency/performance
David it actually is doing very well. Glad I made the swap. In hindsight I should have started out with underdash. Thanks
Going to be travelling for the 4th of July Holiday from Nashville, TN to Indianapolis to drop off the wife at the in-law and then travel on...
Sunday mid-day took the wife to show her where a venue is for a mid July craft show. Danny the ride was exceptional....
Any good stops/point of interest off I 65 between Indianapolis and Chicago? Junkyards, any yard full of 53-56 Ford F100 pickups or...
I have heard nothing but good things about Vintage Air. You might consider a company called Rainbow Products from Mt Ulla, NC,...
What Gordon C said, lol. So once the circuit is identified you either start tracing the actual wiring or anything that might share a circuit. By...
Ok so BOTH cables DO NOT have to be connected to the battery terminals to do testing.
A parasitic draw as you called it can happen because the...
I was reading an article from Rod & Custom 2009 article. It was telling how to check for a short. The technique was to remove the...
Wow. Thanks. The tires on my 55' are 12 years old with about 15K. They "look" good. Time to replace them. Thanks
Very smart move in my opinion. You enjoyed them. Now you get to see your boys enjoy their inheritance.
That article was a good read in simplistic enough terminology
Hello Rebel 43,
So in very simplistic terms what let's that "little cube", relay HANDLE that amperage load that otherwise would impact the push...
Thank you Rebel43. The ignition switch detail makes sense. Turning the switch to the Start position completes a multitude of circuits. Makes sense
Bear with my very elementary question. So when you turn the key to start is that just completing the circuit back to the (-) allowing...
My thoughts EXACTLY!!. Helps quickly diagnose itself. Frame mounted passenger frame rail in 87-91 Ford F150 factory mounting bracket.
Thank you I will. Thank you for your generous sharing of your talent.
Hello Rebel 43,
This is the guy out of Murfreesboro that follows all the tech posts on Facebook. Man I love It. Having a 55' F100 with a 302...
You probably still can.
Which swap meet are you thinking of doing Andrew?
My 55' and a 56' SW project I sold.
I agree with this wholeheartedly. Be in position to get a replacement in middle of nowhere. I run a Walmart EverStart in my 55' for that reason....
It was a decent turnout for a rainy day. Good time
BA and Flipper I plan to be there. I need to find someone in metro Nashville to rebuild a FORD 302
Thanks for the pics
Separate names with a comma.