The Jalopy Journal
Geardrive banger lakester header that I'm not going to use. Never installed but has spots of very light surface rust from sitting uncoated and not...
Winfield S BB downdraft carb and banger intake. I have not run the carb but it looks good. The intake has helicoils in the carb mounting holes....
Had it sold but got ghosted and forgot about it cleaning out some stuff so its back up for sale.
How about $500.00 shipped to the lower 48.
This year was my first but not my last. Sunrise on The Salt on Sunday with my OT pickup that I drove out and camped in the back of.
Leaving Wednesday from Jersey be there Friday. Looks like the Hurricane may be chasing me out of town.
Its being built now by my buddy Harry at Harry's Hot Rods in Dover NJ. I have a really nice F100 column, box and column shift thats going to be...
Roadster developed a real bad knock a week ago. Sidelined until my juice brake, column shift, rebuilt motor chassis is done this fall. Bummed but...
I'll have my 4wd full size pickup, I'll help pull you out :)
I remember that motorcycle it was at Ohio too.
I'm going as a spectator, be there Fri night, Sat and Sun. First time. Going to camp at the bend in the road.
As far as I know all the repop original caps whether gas or radiator are vented between the cap and the threads in the cap. I actually soldered...
Ignition switch is bad
Starter is stuck and shorting out. Try rocking in Second gear
Cutout is stuck and shorting out gen is shorting out....
Pair of Stromberg 48's. I bought them a few months ago as you see them and am not going to use them. Didn't run them so assume they need to be...
Sent from my Pixel 3a XL using The H.A.M.B. mobile app
Wow, Mike, RIP
Bob, Just make sure it has the cam springs and the spring plate that goes under the upper plate. I've bought two "rebuilt" ones that were missing...
Same site. I use the procedure on this page. http://www.fordgarage.com/pages/ignitorB.htm
Scroll down past the pertronics info and Vince shows...
I get my middle bench seats for 20 bucks at the local pick and pull junkyard. I have found that 4inches from the first subrail cross member to...
Two left one 40 spoke and one 36 spoke
I had one that I never got the chance to run, sold it to a guy in Germany. Would be curious to know how it ran vs stock.
Separate names with a comma.