The Jalopy Journal
I have a 1941 rolling chassis, engine, trans, rear end. No GAS tank. How much to go to Racine, WI from Sacramento, Ca. HAMB shipper only. Thanks
[ATTACH] Could only get one photo to upload
I have a built 1941-1948 ford chassis, media blasted, painted, 305 roller engine, 350 turbo trans, 8.8" explorer rear axle, 4 wheel disc brakes,...
my email is firstname.lastname@example.org
Can't seem to be able to post pics??? email me and I can send them to you that way. Thanks
Going to be at Pleasanton swap meet this weekend, (June 1st) with the chassis. Come see it and hear it run.
I built a 1941-1948 ford frame for a business coupe I own. After I built the frame, I decided that the body was too far gone for my talents, and...
stimpy, I will do as you suggest. Thanks
Okay you wizards out there, a friend has a nice 55 chevy that he put a 350 with fast burn heads and 292 comp cam. He also put a serpentine belt...
I removed the selonoid and took it apart and cleaned all the contacts. It had some slight corrosion on one of the contacts. I cleaned it all with...
I bought a used305 chevy for my 56 chevy pickup
. I took the engine down to the shortblock, every thing looked ptretty good. It has the stock 305...
Thanks, off to napa for a 305 flexplate. Thanks
I have a turbo 350 trans that I am putting in my 56 chevy truck. My engine is a 90 HO 305. I have a flexplate from a two piece rear seal 350.....
OK, I will post pics later. Thanks
I have just purchased a 56 f100 that has a 351 cleveland engine. The engine is toast, I am wondering which engines, (ford small block), would use...
I am getting really pissed at the quality of drill bits I have purchased recently. I have purchased them from sears, (craftsman), kobalt, dewalt,...
Any pictures out there???
I have a 41 ford frame that I am restoring for my business coupe. I bought the frame bare, (stock), I have an aftermarket frame mount brake pedal...
This guy is good.. subscribed
Hunt and fish
I have a remote fill cannister for my p/s. It does not have a fill level line. What is the general "rule of thumb" for filling these cold???
I had a problem when the slave was not level. It prevented all the air from getting out. Is your car LEVEL when you are bleeding the system? A...
subscribed. very nice
You lost me at: "I started a thread...". lol
Separate names with a comma.