The Jalopy Journal
Thanks for the part number. On to search for neon tube 1184!
My friend doesn't have the original bulbs so their is nothing to match.
I will PM @GMC BUBBA to see if he can help. Thank you!
I have a good friend who has an Allen Distributor Machine (1415 HD Model) who is looking for 2 replacement strobe bulbs for his unit. He has been...
I am using a Flow Cooler Pump and am very satisfied.
I drove on Phillips Lane last night after the NSRA concert (Little Texas) and it was wild. Lots of smoke, multiple cars doing burnouts, and the...
I would like to read Blues4U’s opinion on this topic as he is one of our resident oil experts.
Do you have the Pertronix Ignitor I, II, or III?
Thanks for the coil info.
Good call on the timing chain!
Below is a link to a fuel tank for a 1966 Thunderbird from Rock Auto:...
I am enjoying the video updates. Keep up the good work!
Would it be possible that your fuel inlet and outlet lines are backwards on your new fuel pump? Just a thought.
My father has a 302 in his 1932 Ford coupe. We used the following radiator hoses:
Upper Radiator Hose: Gates 21794
Lower Radiator Hose: Gates...
Good job Dan!
Below is a link leading to a previous post picturing Tubby:
Tubby was a...
I am using one on my 390 FE and am satisfied with its performance.
Will a Pertronix Ingnitor I or II work with the Bosch Blue coil? I thought I read that the Bosch coil had around 3 ohms resistance on the...
I put 2.50 gears in my wife’s 1960 Thunderbird (FE with cruisomatic) and shortly swapped them out for 2.75 gears which I like much better.
I think the official count was around 12,7XX.
I don’t know if the fairgrounds could handle any additional antique vehicles as it was full!
I hope to be there in my wife’s 1960 T-bird.
I purchased a set of Beldens today from NAPA. Thanks for the input!
“Best” is definitely subjective, but I would like to hear from those who are more experienced than myself.
I am currently running the Autozone...
I am running a stock distributor with pertronix ignitor II module.
I am looking to purchase a new set of assembled spark plug wires from an area parts store (e.g., NAPA, Oreillys, Advanced Auto) and would like a...
Dumb question, but what does an “idler arm” actually do?
Thanks. Learn something new every day!
What is the torque spec on the Holley float bowl screws?
I have used one of Ken’s FE camshafts and was very pleased!
I realize this is an old thread, but am wondering how the flow cooler pump worked out. My wife has a 1960 Thunderbird that I am interested in...
I could be mistaken, but I thought you could adjust (with an Allen) the vacuum modulator of a C6 transmission to shift harder or softer.
Separate names with a comma.