The Jalopy Journal
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Edit chevy didnt have the slit window did it.
I saw this car years ago on a run with my sister and couldn't remember where it was along the trail. I found it again. I think its an old...
I have a 63 conti with a dead hole. I can pull the plug wire and no change in idle. I also get some back fire through the carb on occasion and a...
last I heard it was parked on a back lot at Ford
Ford may have been deeper into turbines than we know. I have been in there turbine dyno building. Its currently used by an FRC robotics team. I...
I am a sucker for Big Red
also new Diesel oil does not have the zddp that you need.
I know of a few more in Iowa there were 3 in a yard a few years ago.
Its your car do what ever you want.
maybe for the raw glass. Not the cheap resin used to make car bodies. If they used polyester resin and a room temp cure you maybe have 200F...
do some math. Saying AL and steel really is misleading there...
I think the sony will let you play music but only from the Ipod. There is no tuner. I think Ryan did a how to you really dont need this unit...
If you guys can give me hand sketches I can convert them to CAD and PDF if needed as time allows.
do you have this in High Res? Awesome pic
What are the exact amp and speakers you have.
You need to know the OHM ratting of your speakers and what OHM load your amp can handle. There...
Thanks for the compliments.
Took these form a display we had here locally
I will be there with the camera and maybe the conti.
check out the rong fu 45 and its clones. You get a gear head drive pretty decent bed. Lots of review online for them.
Dont do the swap the transmission tunnel is to small you will spend more on the swap then rebuilding the engine. You might try to just find...
if you draw in In cad they guy running water jet doesn't have to do it cuts down on costs and time.
I wouldn't mind sharing more of mine are OT to the hamb though.
SOme guys have used sport bike shocks off of Ebay
one thing not mentioned here is you need a lot of tool pressure. You said you polished the holes. This means you just work hardened it and now...
Ryan going Gonzo?
Separate names with a comma.