The Jalopy Journal
I have collection of 32 ford sheet metal for a sedan to fix roof and rear section of body. Stuff that isn't produced by any of the sheet metal...
Unfortunately I found another guy to be cautious of doing any business with. If you meet Kenneth Jack of Hemis Unlimited you'll think you've met...
291 Desoto Hemi rebuilt and was installed in a restoration and soon after owner passed. I bought after the car was having a modern drivetrain...
This is a titled and registered, running and driving 30 Model A sedan.
Im selling at $14000 to get another project moving. I am firm on price and...
Very nice sat of Desoto valve covers, strait no dings, paint is in good shape or strip and chrome. $300
I have some early speed equipment that I don't think Ill be using
1. Edelbrock 3x2 low rise manifold never been run on an engine new inside, only...
Rebuilt by Vertex for a Desoto Hemi magneto. Still in box not but been sat in engine. $750
thinning out the shelves
All the prices don't include shipping.
40 plates no pitting $100
Armstrong Shocks great shape little flash on arms comes...
Really nice set of Desoto valve covers and painted very nicely also. No dents could be stripped and chromed. $350
Would be willing to trade for...
Selling my Desoto Hemi
complete 276 hemi
Vintage speed 4x2 manifold
fresh chrome valve covers and wire covers
rebuilt Vertex mag
Very hard to find 3 port Weiand fuel block.
55 264 Buick Nailhead missing the water pump pulley
Bellhousing adapter to GM manual
stock Buick flywheel and pressure plate
NOS Jahns pistons high compression and comes with rings. I have all 8 just took one out for pics. These will with your 276 block +30 and you have...
I have a couple of bellhousing that Id like to sell prices don't include shipping
1. late FH to Ford 4 speed has a chip up top but useable $65
32 Tudor body form the NW very solid steel no thin rusted metal. Needs bodywork and fix a bad roof fill. I have the pieces to fix roof and new in...
Price: $700 USD
Door and back window original garnish moldings for 32 Ford sedan with old chrome
Complete 276 De Soto good core standard bore
Vintage Speed 4x2 w/strombergs
rebuilt Vertex mag
LA Mallory dist.
mint painted covers with plug...
Looking to trade Mallory mini mag for a Chevy engine for a small moon tank with brackets.
Mini mag is in nice shape and has original...
As stated in the title 32 sedan rear garnish moulding. In great shape
Asking $400 contact Dick 561 339 4773
F2 backing plates
Buick drums lots of material and no chips
Square back spindles
They are in Florida $450+ shipping
Sent from my...
A collection of enough stuff to get a rolling chassis together
Model A frame
46 front and rear complete axles
F100 steering box
36 Ford front hubs $45
Finned nailhead valley pan $75
33 Ford rear crossmember $85
Send me a zip so I can give you shopping quickly. Thanks...
Reversed Merc wheels done back in the day. I'll remove tires befor shipping $250 plus the ride.[IMG][IMG]
Sent from my VS990 using H.A.M.B....
I've done some searches and I cant find an answer to see if this combo will work. I have all that is needed to do the F2/Buick. I'm running that...
50 Merc crank, great shape also have the rods and pistons (+60) $650
Custom grind cam for a 322 nailhead, it's a solid cam. Lumpy idle but decent for the street.
50 Merc engine.. Its been fluxed and is good condition. Heads, block, crank, pistons and rods and pulleys fan and dist. Willing to ship if you set...
F100 backing plates, internals and drums and a set of round back spindles SOLD
Very nice set of 35 wires. No rust or pitting $400
Here is some more parts that could use a new home.
1. 2 pairs of square back spindles either one $125 you pick
2. Obrians truckers Nailhead...
Separate names with a comma.