The Jalopy Journal
I HAVE A THREE SPEED TRANS WITH OVERDRIVE FROM A 59 FORD RANCH WAGON EVERYTHING WORKS GREAT I JUST SWITCHED TO AUTO TRANS ITS COMPLETE TRANS BELL...
thanks guys for the input hopefuly im on the right track but if anyone else has some input I would appreciate it thanks again!
I recently acquired a 55 Packard clipper custom constellation love the car but the funky torsion bar suspension with the electric motor that...
i still have my kryptonics k- beam board from when i was 9 years old, tony alva bone wheels, german racing bearings, independant trucks my kids...
Very kool dude, subscribed! Im building a 31 coupe with a 57 312 y block also, love them i also have a 58 f-100 custom cab short wide box and a 60...
why not hook up the e-brake im runnin the same in my 31 coupe and its easy? but it will work just fine without it in there!
Rage gold is the best ive ever used been doin body and paint for 30 years!
and what type of gun, air pressure?
What type of materials are you using?
i got an 88 percent
I allways cleaned the channel really good with a scotch brite pad and laquer thinner, and then urethane,roll up glass and let it dry at least...
just fuckin do it allready!
whats wrong with an ltd,torino,wagon clip from tha early seventies?
Small bock chevys are like tampons, every pussy needs one!
i use navel jelly and oooo steel wool let the navel jelly sit awhile and eat the rust, you might have to do it several times, allways worked great...
Black looks much better with that tone of red, to me!
Spray can aircraft stripper worked great for my carbs!
fuck them i dont have mufflers on anything! if they dont like it tell them not to listen!
Y-blocks are very good engines, im putting a 312 with 3 dueces in my 31 coupe. Had a 312 in my 57 custom 300 ran like a sumbitch, you will be...
most guys lengthen the frame with a hemi
lots of lube and a big pry bar!! haha good luck!!!
Sooo kooool love it!
Me love you long time g.i. Love the pics!
The crew from california hot rods will be there, we should be there by noon on friday if all goes well. Should be a fun weekend as long as the...
Sprayin it is just like sprayin centari i use a 1.4 to 1.5 tip on a graqvity feed mg1 gun good luck!!
Clean it really good with thinner and a wire brush, wipe it down with thinner and bull dog adhesion promoter and you r good to go!
A nice tan with piping, or a black with a orange piping, or just white with orange piping, just my 2 cents!
just sand blast the spots and spray on a good self etch primer then u can spray a catalyzed high build primer over that!
Separate names with a comma.