The Jalopy Journal
Removing the electric fuel pump and putting back the original pump on the 21 stud for my neighbour , nice original flatbed from ford [ATTACH]...
Pretty much nothing available for patch panels for 33 or 34 chev , parts are hard to find and getting expensive to boot , it appears your rockers...
2 door sedan doors may fit , just need to round off the top back corner , not that they are any easier to find !!!
I just figuire if my car doesnt leave a puddle , I am really low on oil !!
The paint on my 64 ford f100 was 12 years old when some damage to my hood needed to be repaired .Unable to match color and shine of resr of truck...
My 26 T touring was painted 42 years ago , still looks pretty good although it does have some rust coming back thru , lots of chips , flaking and...
Guess I could be Canadian
Summers coming !!![ATTACH]
Just cut the top off a 55 crown victoria 4 door for the roof insert on my 33 chev 3 window that sure seems like it will be a good fit .[ATTACH]...
Welders series also sell the torsional sway bars as well , got a size for everything .Nice stuff
Heres a picture of a 33 canadian hood [ATTACH] [ATTACH]
Ever seen the 33 chev canadian hood sides ??
Model t' s are 100.5 inches
Model a's are 103.5
All models .
I am not sure about the larger trucks .
Great stuff comes from welders series, get it unwelded or welded . I usually get it welded , I believe Pauls son tig welds the parts , some of the...
Didn't realize there is more than 1, 3 speed with overdrive , will have to look for numbers on mine
What to do , what to do [ATTACH] [ATTACH] [ATTACH]
Here is mine , v8 60hp 39 front end , 39 rear end , 32 , 18 inch wheels [ATTACH]
Greta Thunburg ??
I could change my car back to an original T in an afternoon . No modes to the body !!
Still have everything to change it back .
Was a restored car...
Mine is a v8 60hp , no extra hood length need
Much smaller than an 85 hp flathead .
64 falcon radiator , extra rad tubes soldered in and T neck epoxied to the rad shell
How you making out picking up an A chassis??
I have this , v8 60 hp , t frame , 37 tube axle , 39 rear end .[ATTACH]
A chev car with wood is a lot quieter inside driving than a ford .
If the wood is good I save it , no good replace it wit steel.Here is a 34 truck...
Last couple of cars I have stripped , I used sindle edge razor blades . Then sand whatever primer is left on the body , surprisingling quik as well .
This is my second wooden car I am doing !!
I have a 33 3 window waiting it's turn !!
Cars are easier to do than trucks .The returns on the door...
You will have to shim the body to align the doors .
Pist n broke looks good , had you ordered the wood , you would probably just be recieving...
I have also drilled and tapped the 24 6-32 screws that hold each of the door panels on .
Also drilled and tapped all the screws on the rear panels .
I used panel bond to join any body panels and then welded to tube[ATTACH] [ATTACH] [ATTACH]
Separate names with a comma.