The Jalopy Journal
/\ or the m/c bore is small
Yes no problems with all the flange mods. Internals same as F1 box as well
[ATTACH] [ATTACH]Kind of an old [ATTACH] thread but. I bought the $80 S.S. headers to run my engine in after building. three years and 10 races...
I would blend the bottom of the wind screen panel forward into the body. Make it a bit more stylish.
Some accessory to make the brakes easier to adjust..
You don't have what the contributors think of as a front cross member. Most are channel shaped and the spring fits inside the channel. Generally...
Looks like the wrong nut.
Has anyone picked up where Industrial Chassis stopped with the crossmember legs. They were to connect the crossmember to the rear frame area.
Distinctive rear end! Thanks
Looking good. Is that a Morgan in the photo?
It is a bit larger
I found the VW/ Socal damper to be wimpy.....Used one for an Econoline van. Much more effective.
If deathrow doesn't have it I might. I have a wooden box/drawer with a bunch of springs like that.
If it's leaking around the bolts I would put bolt sealer on them. JD corn head grease is what I use for restoration work because of the seepage.
Just wondering if anyone knows what Ford steering wheels will fit the splined shaft of an F1 steering shaft. The really nice appropriate wheels...
D-Russ! Are you saying it didn't come with instructions?
The original Model A axle had positive camber. I bent it to provide 1-1/2' neg camber so the radial tires would grip better on corners. The idea...
Nope. Got some low speed sharp turns.....and not enough omph
Yup, Keep moving or tip over.
Over the winter I got a bit bored...And as I got more comfortable with the car I got to thinking about my puny Rochester 1bbl. carb. So something...
Hello Again! So the last time I checked in I was headed to Blackhawk Farms in So. Beloit IL. I had fooled mostly with the shock dampening thru...
I could see round......not a fan of the tear drops, gangster shit
Fascinating.. Whoda thunk
Good question...where and what is steering? I saw a RF tie rod end and it looks like the tie rod is stepped to clear the hair pins but that's all...
Awesome . So happy you put this together for us to enjoy!
I used the Armstrong shocks on my race car (avatar) front and rear. I bent the arms cold to line up with the points where I wanted them to go. The...
I'm to watch this progress
How long before the upper and lower hoses are going to ship?
You are one creative dude. I can't wait to see you take it for a run.
Separate names with a comma.