The Jalopy Journal
Sounds like the same guy that took me for $120.00.Sent him a check and he stalled me until he could cash it.
Real friendly and seemed to know what...
I just rebuilt my 47 flat head and when it is cold,no smoke,when it gets warm it smokes like a chimmeny.
Been using 30 wt. non-detergent...
Just wanted to thank you guys for your input.
I think that I will put some more miles on it,as suggested,and try and tune it from their.
Recently rebuilt my 47 Ford flathead.
Did not change a thing except valves, guides ,springs,lapped them ih ,had a good seat.
Also installed new...
Welcome,Have one of those trucks too.
My 1947 ford flathead recently had a bad coil.I replaced it and noticed that one side of the engine has brighter spark than the other side also...
Nice job,looks great.
Wow,quite a ride,glad to see that you pulled it out and are ok.
After you change your underware let us know what happened.
Looks like from old school bus.
Nice work.I appreciate the project.
Shows a lot of talent and craftmanship.
Hope to see more post of your work.
Good job Kyle,You have a great future ahead of you.Keep up the good work and keep us posted.
I got screwed from a guy named John Rodriguez from the Bronx.
He is a liar and a cheat.BEWARE
If it were me,I would run 2-1/4" pipes with thrust mufflers as close as possible to the exhaust manifold and dump them out the rear.Just saying!!!
Your choice but if it were me,I would leave it alone and maybe just nose it and deck it.Possibly shave the door handels,add lake pipes and...
Have a 65 that I am building.Interested in your louverd hood.
Can you tell me how many rows,how wide is louvers and how long is each row.
Hagerty insured mine with no problems.The cost was reasonable too.
Can anybody recommend a business or someone that does louvering in or around the Concord,N.C. area.
I have a hood off of a 65 Ford pickup and a...
Real nice,good luck with it.
I know first hand the pain of paying for something and never recieving it.
It makes you suspicious of buying from anyone.
The other thing is to be...
I would spend up to 10K and go for it,don't wait to long thinking about it!!!
Depends on how big the ridge is,try honing it and see what happens.I wouldn'y rering until the ridge is gone even if it means taking it to a...
Sweet ride! Good luck with it!!
I got scamed from a guy in N.Y. Scamers are from anywhere,be very careful!!!
Have you considered running a magneto? Just a thought!!!
I used to drive tanker trucks.Never put additive in the tanks.Also used to load at one depot with one brand and deliver to other brand of gas...
Good luck with your Dads old truck.
Something about 64-66 F-100 trucks.I have a 65 and it has been stored for 38yrs.
Survived divorce and other...
Thanks for sharing.Welcome from N.C.
Good Luck with the build!!!
Real pleasure to watch such talent.Good luck and thanks for sharing.
Have to be careful on Flebay.Been burned more than once but in the end it all works out.You have a nice looking roadster,so chin up and keep...
Separate names with a comma.