The Jalopy Journal
Cut the glass first ! then make the roof fit the glass. Or you'll shoot your self !
use the search box first, there are plenty 59 projects here. good luck
This is rare but I've heard of axle shafts being forged rough enough to be slightly off balance.
A brake shoe dragging ?
Your pinion angle...
We did this one at 1" and it looks fine. The IFS was almost a disaster because the stock upper control arm was out of travel for camber adj....
are both axles the same length ?
machine screw tap, then thread the screw in and pull or push it out.
borrow an old motors manual, explain the system pretty well.
the pinion will rotate if you make them diff. lengths. Pick up a stockcar chassis book ,it will go into more depth with pictures.
Vertex is in Blue Bell,Pa. I used to send them back for a tune up.
you get one try at it ! two shots of starting fluid .........you'll break the tire bead and blow the tire sidewall.
this was 01/2012
I talked with Ron Lubsen of Desman Corp.in SC. 864-225-2580
What an education I received on glass. You supply an exact...
You can cut the hose barb off and use a compression fitting . Earl's has them to AN or just about any combination.
DO you have an air injector pump with the air pipes going into the exhaust ?
Added a couple side view pictures to my F-100 album. All i took. we used a piece of pipe to roll the hand rail tighter then epoxy to attach a...
Separate names with a comma.