The Jalopy Journal
I have made a patch panel kit for the 32 3 window coupe lower rear corners. This includes 4 panels,L/H side and back,R/H side and back[ATTACH]...
I'm trying to find patch panels for my 1932 ford 3 window coupe rear lower trunk corners[ATTACH] [ATTACH]
Sorry been a slack with the thread. Here's the motor and box setting and start of engine mounts[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Hey man. Thanks,motor is a 59. Gear box mount is soon. Stay tuned...
Started making the rear boxing plates today as I'm keeping the step boxing plates the same from front to back[ATTACH] [ATTACH] [ATTACH] [ATTACH]
Ok so I got the front all boxed. Now to move on to the middle of the chassis. I used industrial chassis dog legs to strengthen the original k...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] So now im boxing the front of the chassis. I have made the boxing plate...
Rolling chassis with body
It has paper work as it was imported from the usa
I'm after front cowl,front and read rear 1/4 bottom patch panels. Anyone can help with that?
Reason for using it as I have always used the f1 boxes on my hot rods. The clamp is no different from the flange coated onto the steering box. And...
So after I got the chassis all clamped to the table. I started figuring out the steering box. So I went with an f1 box. But with new Zealand laws...
Hi. 4 speed top loader.
Thanks man! Same to you!
Yes it is. As the caddy has the starter motor on the right hand side. So I will have more room on the left hand side for pedals and steering
Ok I'll start from the chassis[ATTACH] [ATTACH] [ATTACH]
This is what I started with.[ATTACH] [ATTACH] [ATTACH] [ATTACH]
Hey. Yip caddy powder to a 4 speed
Hi guys. I have always liked a channeled 32 3 window coupes. But not many are getting built nowadays,so I started to build one with a body I got...
Looks killer as always kev
1933-1934 ford LH door latches. Red one has had a repair
Separate names with a comma.