The Jalopy Journal
I used Spal and am very happy.Just hope its not Hoffman....I think theirs is Autoloc
Bought a few Hoffman products years ago until I learned the hard way...its all junk.
Really surprised there hasn't been lawsuits after reading all...
Measured it all and the pushrod is correct...residual valves next try or could it somehow be a faulty booster/master?
Ok folks an issue I'd like to resolve.
disc fronts and drums rear.
Booster and dual port master.
All corners are dragging badly and then the drums...
As easy as the title,anyone got a lead for a supplier for it?
I've tried all my usual suppliers to no avail.
Other makes are similar and close but...
Can I ask you both to post pics of the brackets you made?
I'm having a brain fart and hit a wall.
Anyone have pics of Where these actually mount.
Using glass fenders but can't see that making a difference.
Ok going through mocking up the 42 Tudor.
New Bolt in parallel leaf spring and Mustang II (thinking it came with one or the other but just don't...
Fitting a MII in the 42 Tudor.
Coil spring cushion is too big to go into the spring cup but fits the lower arm perfectly...is that ok? Or do I...
Found a 1926 nickel under the wood of the door in my 26 RPU
I used the kit on mine and it installed extremely easily and without modification.
Welcome from another misplaced Limey.
Probably the most stupid comment I've read on here.
Luckily the injuries seem to be minimal considering...
Well then you should be happy to see future work in the making.
Now that made me laugh.
Welcome from an old Coventry kid livin in the great white north.
Welcome from Cowtown.
This pic is straight from my desktop.
No off site storage etc.
Obviously not so why worry?
I love the 57 Olds.
In my day it was call a 'mud guard'
Could you not make an angled shim to fit between the spring and the cossmember?
I'm at around 8 degrees negative.
Anyone ever had this problem?
I'd prefer heavy on straight roads.:)
New 3" drop axle and drop spring in my F3.
OT p/s and all new front end components.
Steering is responsive but seems 'light' or 'floaty'?
I just put a new rear leaf kit and rear end in my 42 Tudor and the installation instructions said 6 degrees for the spring pads as the rear will...
Yes its you, you've worn out the internet again !!!!
The Hamb police ask you nicely to step away from the computer.
Sorry if its a repost but could be too good to miss....
Separate names with a comma.