The Jalopy Journal
Top notch work
Ok judging from the responses it’s half mixed emotions
Thanks for weighing in fellas
Shipping costs are very high
And I bought this local , I have others that need straighted and could send out. ( again shipping cost )
It is indeed original
Hey fellas , I have a partial drilled axle , and was wondering if it’s gojng to be a problem with heat to mig ( I don’t own a tig) the holes...
You could always mount a Bluetooth speaker inside of it ?
These are two great sources for info
Nothing wrong with the 32 box with a few upgrades
King of the 32 box. Herb Howell in Ohio. Roller...
Anyone have any tips/ideas ? The left side of the wishbone is good the right side looks cocked ? And will not go onto the axle
When I rotate...
I’ve had had plenty of Scott injectiors. But have Never seen the scotts run successful on there own Would love to hear this run
Thanks mike. Just wanted to make sure
How far can you safely turn wide 5 drums on a brake lathe? There should be a discard/throw away Number ? Mine have some fairly deep ridge lines
I’ve looked but can’t find what discard would be on turning 39 wide 5 drums ? Any help would be great guys. Thanks
Keep up the good work , and post lots and often!!!!!
Awesome, I’m going to try this
Are there any new bushing /shackles anyone would recomend ?
It Has taking over 15 years to get to this point of just now having (almost)...
Was a pain to find this one took 5 months or searching and wanted adds and a 2 hour drive to find this one Just Got the old ones out
Any ideas on this ? Can I get away with putting a bushing in it. Less then half is worn. So a bushing should Center ?
I have more time then money, that’s why I would like to accomplish the most of it my self. Not looking for award winning finish, I have laser...
This is the stuff I used , I assumed it is viniger base no real ingredients on it. Other then says it’s safe ect
It’s stamped bare metal that I had soaking in vinegar type solution store bought , it is not cast,pot metal
[ATTACH] Any chrome shop guys on here ? What’s the best recommendations to use as a filler to fill deep pits I’m not a scared of doing the sanding...
Great looking engine
[ATTACH][ATTACH][ATTACH][ATTACH]. Sorry it was not for lack of looking for other posts I just got confused with the 32 axle then the 32 to 36...
Hey guys hoping someone can help me if this axle. Was thinking 36 ? [ATTACH][ATTACH]
Sent from my iPhone using The H.A.M.B. mobile app
Bullshit photobucket Car looks good , wish we could see the work that went into it
Been looking in a few old boxes and found these nos plugs anyone no the age 50s?60? Also the are a few surface rust spots. What's best way to...
That's some nice parts you have 530
Dumb question, you don't get hassle from running a cali plate?
Separate names with a comma.