The Jalopy Journal
I unbolt the spring pack then it spreads by hand easily. then using a c clamp and a long bolt like some all thread tighten the spring pack back...
You can cut the springs In the front if you just want it a little lower and in the rear a set of chevelle rear coil springs lowers it about 3...
Yes they can be lowered
Speedway makes an adapter to run any fuel gauge with any sender, haven't used it but sounds like a handy product
The stock cross member would have fit if I wanted to use it and the stock seat fits too. There is a half inch of clearance for the driveshaft when...
Full size caps will fit because I am putting caps on mine to cover the rust but the baby moon style are specific to us wheel wheels
I designed this notch for the 49/51 mercs too
We are bagging a 51 right now
I am running the chrome version on my 40 dodge and on my car trailer. Got them from summit and they are really nice for the price except the...
what a story, just read it from the beginning...wow
Here is a Merc my brother and I chopped 6 inches and are currently finishing up
Try going to a local muffler shop they should carry them. A few months ago I needed some andI found them on eBay as well
Never sand with your hand and if you must use your palm not your fingers
Kelsey Hayes strippers!
You can get the boat 2x1 intakes for pretty cheap, I got this one for around 150
Cool modified! If it were mine I would put lake style headers on it!
I just got finished chopping a4 door merc went very smoothly and kept the gutters too. Keep up the good work!
My car is rubbed down with Gibbs and i like using it. It puts a satin sheen on the bare metal. I rubbed it down every two weeks or so. If you wipe...
4 door 51 merc my brother and I are building
I am building a 27 t coupe on a model a frame and just made some tabs off the floor structure and bolted it to the top of the frame in six spots...
The Eastwood vice mount flaring tool was a fantastic purchase for me
The s10 t5s require an extra adapter because the input is longer than a standard Chevy. The camaro t5 has the standard Chevy length but a...
Is a 265 considered a reliable sbc over a similar year hemi motor? The hemi will always be cooler to 99% of people too! I bought a wilcap adapter...
My brother and I just did the interior in our 40 dodge. First time covering a seat and it all cost under $300 and a day of work. The sewing...
No more photos?!
My two favorite were the 41 ford in the suede room and the 40 merc upstairs
I have seen a torsion bar Mopar with bags before, they took the torsion bar key out and added another strut on the front of the lower I arm. The...
I also use the toilet rings work well!
Separate names with a comma.