The Jalopy Journal
Does anyone have any tips or suggestions for installing new glass and whisker/channel install in a steel car. I can get them in but not together...
Got this one almost finished
My man cave
Here’s mine I bought a few years ago had been in a barn since 64
My shop truck
My 50 F1 is still 6 volt still runs great.
just to share I had posted about my troubles with my transmission in my 32 on its maiden voyage. Long story short I drove my 32 less than 100...
Here’s mine almost through gathering parts fixing to get started on it
I had SIDS drop my axle 3 inches and also put dropped springs also. The rear has posies 3 inch dropped springs.
Called b&m they said check the valve body. I’m not a automatic guy so I’m not sure what that entails
Building myself one to good luck
I dropped the pan and found nothing obvious nothing was loose or came apart. Will go into park and hold now but no matter where you put the...
It’s a lokar shifter but I took it loose from the shifter on the side and shifted the trans by hand and still mechanically still no improvement
took my 32 on its maiden voyage today just down the street. Stopped put it in park then when I went to go it would not shift into any forward gear...
Does anyone know for sure if 40 Lincoln brake drums would work with 41 lincoln backing plates?
Thank y’all so much
ive almost got my 32 daily driver finished n yes it has a auto trans because of Atlanta traffic. I’ve never built a car with a auto trans before n...
Thanks for all the replies looks like I'm going with vintage air
im looking to put a air conditioner in my 55 Chevy pickup and wanted to get opinions on what is the best company that makes the best a/c set ups...
16 x 4 on front with 500/525 16's and 16 x 4.5 on back with 7.00 16's
[ATTACH] Here's mine
Thanks for the info
does anyone know if there is an easy swap that works using the bubble lenses of 36 headlight and maybe the rings if necessary on different smaller...
I'm fixing to put a 454 and a auto trans in my 55 2nd series pick up and I'm trying to figure out if the 2nd cross member where the bell housing...
is there anyone around that will widen my 32 wire wheels?
That's as bad ass hot rod as it gets
34 ford pickup dash and gauges. 175 plus shipping.
My parents got me a 55 Chevy for my 15th birthday I'm now 48 and still have it but it's in a million pieces at the moment.
Separate names with a comma.