The Jalopy Journal
runs low 6's in the 1/8 mile
has also run 138mph at 9.86 in the 1/4
just changed the leaf spring straight axle to a dropped...
that is what I thought exactly. its just that I never seen one like that.
you and I share a very, very narrow car.
what is your front...
I am changing my leaf spring straight axle to a straight axle with 4 bar with coil overs.
My vega cross steering box will now be in front of the...
Just a note about the axle i was searching for.
Bought a 48" mas axle from lake headers.
Sent it to wac customs in conn.
Bill cut it, welded it...
I need a tube gasser axle with a 4" drop
i need it a custom length.
I see them either way. I put mine (48 anglia) to the rear.
After much research i decided to do this because somewhere i read that it is possible...
Any one have any info. On what the et's and speed was of the aa/gas cars of the late 60's early 70's was?
Both 1/4 and 1/8 mile
With power and torque these cars are very unforgiving at speed
mine, ("angie") has been streched to a 95.5" wheel base
it is still a handfull and...
Looks nice and clean. Lots of steel. We dont see many that are not rusty
is going to be a gasser?
again, not an expert....
at face value of what you said i think you need to get some more knowledge of engine tuning.
not knowing what advance...
I FOUND MY VAC. WAS ACUALLY HIGHER THAN I THOUGHT (ABOUT 10 AT IDLE) I PUT IN THE 6.5 VALVES AND MADE SURE THEY WERE INDEXED
Car has a ladder bar rear and i recently put in roll control.
(god only knows how i got that to fit)
i already fixed the (duck walk) with the...
Any one want to share photos of a coil over front end they have on an anglia.
I am currently running a parriall leaf spring tube axle
Sure is, some say 3 hole grill is most desirable.
I would have to agree
Ugly? Who ya callen ugly????
I am installing a vw (sol-cal) type steering stabilizer on my anglia gasser.
straight tube axle.
i am mounting one end on the tube and one end on...
2 thumbs up!
can't be too many gassers in this world, keep up the good work!
1948 bbc anglia drag car
94.5" wheel base
50/50 weight distribution
i am looking to change my par. Leaf spring front axle to coil overs...
That would be too bad.
We were able to attend and race (if only one pass) at the 2011 event and the atmosphere was nothing short of amazing!
I have a locker in my 66 shelby gt-350 and love it because it is so strange
it snaps, growls and sometimes will stick in lock and bag louadly when...
yes it would be scary in the wet.
that light a car, the trac. loc could cause a poblem as well.
Am going to switch from par. leaf springs on my tube axle anglia gasser to a 4-bar coil over set-up.
I can only seem to find a std. radious rod...
To clairify, I am talking 4 link, with panard bar and coil overs in the front to eliminate the par. leaf springs.
The rear is all...
I Have A 1948 Anglia Gasser With A Bbc And Par. Leaf Springs And Speedway Axle.
I Have Been Battling A "duck Walk" In The Rear (like A Severe...
my 48 is 38" pin to pin custom length from speed way
i have a shorter one 34" if you are interested
here is ours.
a nasty lil girl she is
blown 509 chevy
1948 anglia gasser
we put our on the road/track this summer
we have a blown bbc with a turbo 400
we have been battling a severe handling issue...
Separate names with a comma.