The Jalopy Journal
fender repair is in its future....
Can You do same but with these rim
oh very very cool... yes i actully have black steelies with chrome center cap an trim rings. This look is cool...
very cool... needed some help on my fender too.. thanks bro
ohhh boyee.. THANK YOU ..Thats the idea.
how about a nice static drop with steelies an white walls.
thats how im trying to build my new to me 62 c10[ATTACH]
i will definitely try an do selfies ....
I got the harness from firewall to back.(intermediate) >< then the harness to tail light buckets.
Ordered from classicparts.com Also ordered new...
Harnesses Arrived TODAY YAY !!!
hope to dig into this soon.
i already ordered my harness from classicparts.com
just waiting on the delivery.
Well since i'm on a temporary lay off i got out to the garage earlier. still haven't received my tail light harnesses but, was going to dig into a...
yes... i will be digging into this soon. i Also have a new rear harness coming . I got both harnesses from firewall to tail lights. just mainly to...
Whats The Correct Bulb Number For The Rear Tail Lights .. Local PS says 7528 LL which is sylvaina long life.
An Whats Correct For...
Thank You... Ill Be Picking Up Those Stock Tail lamp bulbs from my local PS. Do You Know The Correct Bulb For Hood Marker? Those Are LED too But...
Im going to start at power an check everything an try to get the rear to work properly again. Then tackle grounds up front.
I should've ordered a...
Well i Havent Been Able To Look at The Original Headlight Dim Issue. I Recently Encounter This No Working Tail,brake,turn light issue now at the...
I's the headlights switch the power source after the fuse block?.
Cause fuses are good
I'm almost to that point...
There very cool an bright when working but right now I have shitty lights. An no taillights brake lights or rear turn...
I have a aftermarket accessory turn signal switch that mounts to the column post. My original turn signal had been removed by previous owner. I...
Well pulled truck out yesterday.
An now I have NO taillights , brake lights . Rear turn etc.
So I got the wheels today.
An they seem to fit ok.
Looks like everything will clear.
This offset/backspaceing actually moved the wheel inward 3/4" to
Well I had looked under as it currently sits an looks like there's room.
I'm gonna lower it eventually.
The wheels I ordered was only offered in...
According To JEGS The Rims Are +3 offset with 4.125 backspacing heres the part number i ordered.
055-61B-57060 there Raceline 61B in 15x7s
Well hope the rims I ordered 15x7 with 4.125 backspaceing will be ok.
If not I'll have to swap to the 15x6 with 3.75 backspaceing.
haven't had time to dig in...but went to start up the truck to let it run a bit since purchased ...an noticed now i don't have any tail...
So wondering what is a good wheel fitment for 1960 to 66 c10s.
I'm currently running aftermarket rims 15x7 with a 3.75 backspacing.
Mines stock now. On 235s.
Just starting to fiqure my drop stance.
Just how my keyboard is set up.
So Im Looking To Drop My 62 C10. LWB
It Is Currently A Torsion Bar Front.
My Main Question Is How Low Can I Go In The Rear? Im Not Going To "C"...
Separate names with a comma.