The Jalopy Journal
I'm changing rear ends in a 51 Chev pick up and it seems to be the rear axle housing needs the perch holes offset to the front. Anyone know just...
Only problem you might run into is that the shatter-proof housings are often bigger than their stock counterparts. You may need to modify your...
Fuckin hell, man. Looks great! What colors are you gonna paint it again?
Holley 750 by Zeke.
By "angled pretty far back," I presumed you meant the angle at which the engine and tranny sit in the car. If you meant how far back in the...
Nothing. In fact, if you look at pro door slammers the engine is usually pointed down toward the front about 3 degrees. Engine height and distance...
You're totally gonna be a home-body Johnny, then a shut-in, then a total recluse.
What Scottybaccus said. Pro Stock cars use 1/2" bolts in their 4-links and don't seem to have too much trouble. If you set the suspension up so...
I'm building alot of adjustability into mine. Not very traditional, but maybe you could make it look so.
What did you find, Dave? What have the Germans done to you? It's only been a month, are you goosestepping yet?
High noon, eh? Very well. There will 6 or so Dead End Kruizer cars about the fairgrounds.
I prefer the louvers that are arched, rather than flat across the top. Here's a lid I did for a Roadster project I was working on and the lid from...
31 with a 31 Tudor.
Dead End Kruizers. Mnpls, MN
16 members, about all on the HAMB.
With V-8's it's all about combonation. Your compression ratio is determined by both the heads and the pistons. Which intake you choose is...
My name. Not too exciting.
What a great time. Thanks to all the Bastards who make this work.
hey!Tommy Ivo is in it! Isn't that the same nerdy guy from "Hot Rod Gang" with Gene Vincent?
Pro Stock GXP from work. That's VooDooCoconut driving.
What's the third link in the rear for?
Ignorance and arrogance go hand in hand.
The high yesterday was -2 F. It's so cold if you piss outside it bounces.
I'm with VonMoldy, I think you'd be better off using a sander. But if you're stuck using a die grinder:
The bit you are using should look "fine,"...
Not to be a dick, but read a book. You can find all the information you are looking for. Street Turbocharging by Warner is good basic one from...
What kind of exhaust is that? It sounds tits.
I'm stoopider for having taken that test.
Look at old airplanes. I'm not talking military, that shit's too expensive. The ones I got for my A Tudor are from a '58 Cessna. Fit perfectly...
Separate names with a comma.