The Jalopy Journal
I have a 378 in my rear end which is out of a 1947 Ford truck. I have the 1932 Ford with the V12 engine and it is running well. And it has the 39...
Here is how I mounted mine.
I would like to get some opinion on rear end gearing. I have a 1953 Mercury Flathead with a 1952 Mercury 3 speed transmission what is the best...
Here is a picture of my hydraulic clutch slave cylinder on my 3 speed Zephyr trans.
Here are a few pictures as of this past week with some head way. All of these panels have been sand blasted since these pictures were taken....
Thank You for all your comments on this subject.
I appreciate all of your post on my subject.
Thanks for the offer. If you could e mail me your phone # and we can talk. I am working this weekend will not be able to attend the Goodguys....
Anyone using a Harbor Freight bead roller let us know how you like it if it is worth the money and show us some samples if you have one of them...
This is what I am starting with. I am picking up pieces as I am working on it.
Very nice build way cool looking.
Thanks for your e mail volksnut this week with pictures of the car.
I appreciate everyone feedback on this. Now I have an idea how it would look.
This is a 1948 Lincoln Continental V12 flathead.
I did not realize that someone else had posted yesterday of the closure of Fontana raceway.
Here are a few pictures with the smaller headlights.
Rumor has it not only did Irwindale raceway closed a few weeks ago and now apparently Fontana is next to close due to noise level. Give me a break...
I have a set of front Buick brake shoes I would like to fit them into a Lincoln rear backing plates. I know that the Lincoln brake shoes are...
Working on this project all weekend pie cutting the lower bottom panel to have it fit to the body. Next I will weld it all and place. Next I will...
This morning I decided to cut the bottom panel to the appropriate width and lenght needed for the body to sit in. Here are a few pictures so far...
I posted elsewhere today on my next project going on. But here I am building a 1929 / 1930 Track T with multiple pieces from various years. 1928 /...
All I can say I am on a roll every night working on this project so far so good yesterday I went and bought the sub floor from a 1931 Roadster a...
For this second project trying to find the back cab panel. So I decided I will be building the whole thing from another panel to make it look...
Thanks for the advise we have cut the center of the body and narrowed it by 3 inches or so to make the Duval windshield fit the Briggs body to...
Here are a few pictures of my project worked on it this past weekend bought a plasma cutter a tig welder as well as tube bending machine.I made...
Sorry for putting you on the spot with my reply .
Sorry I posted the wrong picture. But it looks like the one in this picture the rear panel with the rounded corners.
I am having Bob at Wilson machine making me a pair of Ford hub for my buick fin drums.
This is the second set he has done for me nice work.
Can I stop by tonight to look at what you have. i have Wilson in Texas making me a pair of Ford hubs to fit the Buick fin drums.
Here are pictures of the Buick front backing plates I promised you I will weight them and let you know on the shipping charges. These...
Separate names with a comma.