The Jalopy Journal
Check the 409 Chevy. I believe it is the front carb for the dual quad motors
[ATTACH] [ATTACH] [ATTACH] the bracket on the radiator for the front and halmoon shaped hole for the rear is what the handles hook on to to hold...
Here is a picture of my original hood sides without the handles. When you you put the handles on the hood you move the spring towards the bottom...
Are talking about so cal speed shop?
3427 E McDowell Rd, Phoenix, AZ 85008
[ATTACH] [ATTACH] Here is my work in progress with a 3" chop and stretched roof. Only chopped the rear window 2".
Here is an adapter to go from 3/8npt to 5/8 -18 straight thread.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] this what I used in my 32. The shifter is for a 1970 chevelle with console. It moves the shifter to the...
Looks like a 58-59 nine inch
try this doesnt have prices on the page
are you sure they are 3/8" I have two original boxes and they are 7/16 -14 threads on both of them
mine also has a bunch of holes. they were covered with a tar like goop. I am sure it was from the factory. I am going to weld the m shut.
let me know if you need anything else
I can get you what you need. I am out of town will be back Sunday and will take some pictures for you
Here is my work in progress. It is chopped 3" with all original steel fenders.
http://www.cpttransmission.com call art carr he will set you straight as for which is the best option
here is mine 3" with stretched roof. only chopped the rear window 2" for better visibility. [ATTACH]
four barrel uses a different rod that a two barrel. readily available or modify the o e you have to work.
8" from a maverick 56 1/2" wide
they are called battery compression lugs
I cut mine 3". Cut at the bottom miter joint. It will fit together just need to push sides in by hand until the bottom slides into the vertical...
I got a roof from a early 1980's Volvo wagon it doesn't have any ribs so it will work like you are planning to do. Have not installed it yet...
I have a picture for you but I can't get it to upload keeps saying file to big.
Where did you get the wood bows? I haven't been able to find any one to return messages woodart and Ford wood are terrible for customer support
I used a shifter for a 70 chevelle with a console. It put the shifter in the center of the car handle is a pick up one worked perfectly. The...
I am building a 34 with other rear spring set up with the spring mounted under the frame rails. It looked like it was pretty cramped in the rear...
Separate names with a comma.