The Jalopy Journal
Anybody know where I can get a picture or drawing of the clips that hold the distributor in the block for a 52 Ford 215 inline 6. Ours are...
Yikes! Ok , so if I wanted to use a "period" tranny, what would bolt up to my '41 216.
I know I will have to loose the torque tube.
OK Yup... :(
Ok, So found a '88 GMC S-15, 4WD, 5 speed.
Am I getting closer? Is that a possibility before I get under it?
The price is REALLY right!
Sorry, Nooooooooooo high performance here. A 216 in a '41 chevy suburban.
Could prob use something with a rubber band.
Will keep looking for one...
OK, That's what I thought . Knew I would get good info here!
Just an Idea why I couldn't use the tranny from the 2000 S10. What would be the reason. Is it
a bolt pattern question or something else...
I have a 41 Suburban and I would like to put in a T-5 trans and change the rear. I have a 2000 S-10 pickup but the info I have seen doesn't...
All Stude's were ahead of their time.
Replaced the coil and moved onto the fire wall. Seems to be working now. Got it up to temp and drove it around the driveway. Have to take it on a...
Hard to check. Only quits when hot. Then when I try to start it, it runs for a second and quits. Must have spark then.
Then as soon as I turn it...
Had the '28 out (has a sb 350 in it) and it just quit. Wasn't getting fuel so I put a new fuel pump on it (electric)and ran fine - until it got...
Finishing my '41 suburban, before it even went out in public, leaned in the passenger side to bump the starter for some stupid reason - the thing...
The make out seat in my '28 chevy
He is a cool kid. Built robots to compete nationally (with his tech class).
He can build anything. Would have done a lot better job on that car...
Nephew used it for his prom
Did a cross steer with the stock axle and a vega box on my 28 chevy. Car is so light it steers great. Oh. Also have the big stock steering wheel.
Weld a large nut to the head on the inside of the nut
Yep, Was a member of the stovebolt a LONG time ago. Have re-registered and will check as soon as they reply
I know It's been done before but nothing seems to come up on the searches.
I am sure I saw somewhere that I could get a tranny that, with some...
My all time favorite thread!
I bought a "lock out" driveshaft for my '28. works slick. Lever in the car (hidden) disconnects the rear from the back of the shaft. Was a little...
Don't know if it will ever look better than it does right now!
Had the same experiences with my dad under heavy trucks and dozers. Same work - bigger wrenches.
Did most of my breaking sitting in the seat of a...
One of my pride and joys. Had a blast with this one. Will have it out and about again this summer.
Nope, Kinda stuck in the recent ice age.
We don't even have cell service for the area we live in so I just use mine for trips. Just have the...
The wife and I had a wreck with our daily car and was towed to a garage/storage place.
Turns out the guy is a collector and gave us a tour of his...
Here you go. OC Maryland
Mine's on the right
Separate names with a comma.