The Jalopy Journal
I made the bottoms of the quarters from 18 gauge
I used a brake to do the right and left side then shrunk them down by hand with hammer and dolly, until I got the right shape
Ok, first off thanks to everyone that post tech articles on this forum !
Here are some pics of the progress ive made in the last month.
The fiberglass inner panel is 4 a full trunk lid
What kind of working time does that type of glue have
Ok, I'm trying to get the back of my car straightened out. I need some advice. I don't have a deck lid the car was originally a rumble seat car...
Thanks ,I'll give that a try
I've searched on Google lots of pics, I was looking for pics of the hinges
Surely someone has a 32 PB rumble seat coupe and could take some pics
I may go that route, I'd like to try and get a crown in it . The inner structure has crown built into it already.
I have an inner trunk structure made of fiberglass for a full size trunk lid
The Desoto looks to be just like it
Here's what I have, somebody welded metal in over rust and used a lot of putty. The lower panel was crooked ,
Does anyone have or can they take pictures of a 32 PB coupe with rumble seat of the hinges the backside of the lid and the inside bottom panel...
Ok, so I tried to get this done I spent an hour or two on it. Whats the best way to get the bead straight on the edge
Use stainless and polish
Thanks , They look to be in fairly good shape but are thin
[ATTACH] Looking for some advice on sheet metal work. I've been looking for fenders for my Plymouth for a while, here a some pics of the fenders I...
hot rods, I was hanging out at the drag strip before i was able to get my licence
Super glue works great
That makes sense ,thanks
Ok, I believe I have my side glass figured out on my 32 Plymouth coupe, I put the windshield glass in the frame today . My question is the rubber...
The power windows kit was speciality like yours , easy to install
The Glass man Placerville, Ca
I had a chance to try out the parts I made they work good I appreciate the advice thanks
I added 3 1/2"
Here's what I made up I'll try it tmro when I get a chance
Separate names with a comma.