The Jalopy Journal
how much for four. please call 928 627 7251
PS What happened to PM's
Thank you very very much. LATER
I need the frame drawing for a 1940 Stude commander can anyone help. thanks.
I have two fords and one Stude. In 1940 the cheap Stude was better than any Ford made. My 30 ford and Stude are all steel. the neat thing is...
Thank you. got any Photo's. Later
I need information on installing a Chevy 350/th350 into a 1940 Studebaker Champiom. What needs to be moved and or cut etc. I plan to use a IFS...
Speedway...............sells c-4 and adaptor kits.
On my 8ba, I just pluged the hole and made a cap for the pump base. works fine. I put a pcv valve on the cap i made and a old chev. oil (327)...
Buy two 180 deg. tstats. they are cheap and work very well. mine open at 180 deg. them runs at about 160 deg. with them. I live in Yuma, Az....
I just got this one running and on the road last friday 09/08/06. so far ..so good. LATER
The DALLES is in the Portland, OR. area check the clubs in that area. good luck.
Got the PCV System and the Fuel line/ fuel pump mounted. Thing sure go slow when it is 120 deg. in the shop @ 9AM.
This floor was made with 3/4 X 3/4 in. and will lift out. makes things easy to get too. the floor is a 1985 ford Bronco hood.
My brother built the motor. He has been building motors since 1948 still has the flathead tools he got new then, he is now 73 and still going...
I think you souuld buy a Deuce and be Happy. People build the car they like.
Life is to short --have some fun with whats left.
Got this motor over three years ago. It is now ready to install, The frame will be painted this week and I can start getting this thing...
This looks great. I did not know so many people were using 32 tanks in the "A''. They all look good. everyone makes his own Hot Rod. LATER
32 TANKS ARE MADE TO SIT IN THE BACK. I will be running full stock fenders on the 30 so I need the full rear panel.
We can grind the valves for you. easy to take out and check. we have the correct tools to do flathead valves. send them we will return like new....
I just put a 32 tank on my 30 frame. Made the frame add on for under $40.00 with new steel.
Check "Speedway" They sell these things ready to use. LATER
I just installed a 1932 Tank in a 1930 coupe It is not very hard, I made the frame, but you can buy one from a place called "Dagel's".
Does anyone make an adaptor to use a Chevy 350 Trans on a 49-53 Ford Flathead. I know Speedway has one for a Ford C-4. But I would like to use a...
My next one will be a genie. I do not like the Lokat shift Knob because it can not be changed for under $55.00 or so .
I love the 1933-34 Plymouth this is mine with a 350-350. Keep up the good work.
Buy a new GM Motor in a box and be very happy. It's all new and may be less money in the long run.
Have not seen it. but I do have it on TiVo. will look at it later
Edelbrock 1405/1406 is 600cfm. all I know.
Read all post. think I will run 3.00 and not the 2.75. the thing is I can get the 2.75 for $150 cash. still will wait for the 3.00 to come...
Separate names with a comma.