The Jalopy Journal
I stopped by to see Rusty this morning and check out this jalopy, been awhile since I’d seen it. This thing is flat Kool!
I even got a chance...
I’m sure we can figure something out.
Kick ass buddy! Congrats. I will come up this weekend and check out the finished product
Started working on the 2nd air cleaner tonight. Got a bit left. Did some mock up to see how high I can raise the carbs....
Right up till it annoys me. Then it gets some short porters.
Started building the exhaust today. No pictures of that yet. Ran out of tubing, will finish after Xmas. Few just because pictures.
Thank you. It is a early stock big truck intake.
I’m not sure there will be any room. It hugs the exhaust quite close.
Sent from my iPad using H.A.M.B.
No. I looked into it a bit. If anything I may need to let it warm up a bit longer. Which I normally do anyhow. I’ve found a lot of people...
Huge snow storm today. When the power stays on long enough I’ve been out buttoning a few things up. Then decided to mock up the intake and...
It is a stock truck (1 ton) intake. With the heat risers removed and without the aluminum riser.
Sometime in its life, I suppose 50s or 60s someone cut the heat risers off of the intake. I cleaned it up and took it all off. Ran it through...
. Got a couple fair pictures of my new intake. I can’t want to assemble this thing
My buddy picked up my intake! Hopefully get it this weekend. He sent me this picture, I think he took it with a potato. Can’t wait to get it...
Thanks. I’ve looked into him a bit.
Thanks. Will do
Stumbled on the pictures of sectioning the bumper. 2.5”.
Me and a couple of my taildragger friends.
Thanks for looking out! And the compliments
Couple big milestones this afternoon....
Installed the refurbished crankcase tube, and pushrod covers. [IMG]
I’ve spent a bunch of time trying to find a kool air cleaner. Didn’t want to spend a ton on some early aftermarket piece. I used a...
Refurbished the water neck and bleed off line. [IMG]
It will do...
The Chrysler has a 25” block. Plymouth and dodge have a 23”. But some full size dodge trucks had a 25” with factory dual intake and exhaust
It will be awhile before I can test on it.
I think they are all this way. No I don’t think any roll down.
Full size dodge trucks had a 25” block. Same as a Chrysler
Sent from my iPhone using The H.A.M.B. mobile app
Ha. Damn Where were you a couple weeks ago.
Separate names with a comma.