The Jalopy Journal
We just knew you could do it yourself.
Plus you learned something. As the great Gene Winfield says: Everyday is a school day.
Here's my Forty Story.
Re: your comment that your soldering iron will barely heat up to melt solder on the tip. I would suggest you thoroughly clean that tip and make...
Yup Ricky wants to duplicate this suspension. Now Tom will need to figure out how which is right down his alley. So coil springs are in...
Thank you so very much
There is nothing like H.A.M.B. support
Sent from my iPhone using The H.A.M.B. mobile app
Thank you so much.
I guess your computer skills are much better than mine as well as my buddy.
Hope the build comes out better!
A friend of mine is starting a new build: Show Rod 34 Ford pick up. He is planning lots of goodies: chop, section, molded...
At this point in time I am returning the Aluminum Stewart for credit
Looking into their cast iron unit.
Appreciate your comments...
The thermostat is a 180 degree high performance model from Speedway it features (3) 3/16th inch bypass holes.
So it looks like I will be okay with...
Actually I was referring to the by pass hole as shown in the picture posted by Johnny Gee.
Do I need this opening for a street car with a heater?...
Just received my new Stewart Stage 2 pump Model # 22301 for my mildly tuned 327 SBC (circa 1965). I bought the aluminum pump...
I took the advise of the group and ponied up for a Stewart stage II
It’s going on this afternoon
Thx to all for helping
Sent from my...
Water pump has 71000 no weeps seeps or noises
The fuel pump has 30000 plus
It fills up the site glass before carb every...
I am in the process of replacing the radiator on my 40 Ford coupe (327 power). Stepping up to a Walker as the last rebuild...
Lots of news and talk about the government starting back up a new push for E-15.
As bad as E-10 is this more potent blend is much...
Before you get to involved with taking it apart
Why not rotate the engine and tap the area with a small hammer
Worth a try
Thanks again to all the HAMB-er community
Great info for me to use
Will send pics when I get-er-dun
Sent from my iPhone using The...
Looking to give my 40 a change of view. Was thinking of going from black walls and Halibrands which have been on the car for...
I was hoping to find out who made have done the modifications.
The when and what they started out. S you can see lots of trim wholes...
I think your car is the same one I am looking at.
Please let me know about it
PM me if you would feel more comfortable discussing
H.A.M.B.er's I ran across this 1949 Canadian Ford Meteor for sale.
The seller says he thought it was originally built in Tennessee as that is how...
The problem of the SpongeBob brake pedal has been resolved.
Turns out the under floor rod from the pedal to the booster/ m-c was...
Thank you to all responders
I will apply those suggestions and let all know the outcome
Really appreciate the support from this group
Here is a picture of what I am dealing with.
The system installs on its side so picture the mounting ears in a vertical plane. A belled...
Please take a look at the picture of the m/c I was able to post.
Some new information
Finally found an image of this m/c. The large black cap was the old location of the filler. It has been sealed . The brass...
Dear Clay Mart,
There are no residual valves either in the m/c and or the rest of the system.
The m/c was not bled. according to the install...
Thank you for the reply.
Yes the shoes were adjusted out until the drum would not turn. The shoes were then backed off 10 or so turns...
Once again asking this vast resource of knowledge and wit for some guidance with this dilemma.
Back story, friend of mine buys a...
They look like ss sauce pan covers with different knobs? Take a trip to Bed Bath and Beyond for some ideas and a possible source.
Sent from my...
Separate names with a comma.