The Jalopy Journal
I have one of the eelco kits
I tried the autometer box with the Joe Hunt adapter with a Ronco mag and it never did the same thing twice. I tore up more parts in the waterbox
slapper bars are legal, ladder bars are recommended
The blue 55 chevy that runs with the sega called the Undertaker does big wheelstands with slapper bars
We just sprayed my Studebaker with hok flat clear and came out great
If you are interested we are starting a sega group in Texas. same rules, Quain is in charge and if you haven't been to one of our meetings I would...
You should contact Walter Boyd , his number should be in the phone book,he will know if anyone does.
I used Westside Performance and they did a very good job
This transmission came out of a86 chevy truck,it is a aluminum case with 3rd gear is 1to1 and 4th is overdrive. It resembles a Muncie or borg...
I need to know the years that Camaros had the bellhousing with the transmission tilted at a angle . Thanks
I will look at my pictures but I don't remember one but I still have my event poster
If I remember right ,he walked into the winners circle without 4th gear working
I idle mine on both carbs and they work good
Its a single cylinder ,single stage,very good compressor just don't expect too much from it. Around 125 lbs. max and not a lot of volume but I...
I have a 3 speed overdrive out of a 42 champion that is free plus shipping
When the coil is going bad it will kill different cylinders
I built one out of stainless pipe but I don't have the 3x2s anymore. I kept the thermo housing in case I ever needed it
2x4 Edelbrock c26 manifold ,it is in very good shape, gasket surfaces good and no thing broke or stripped
Holley 4412 does not have choke and needs a rebuild. It is clean inside and rebuildable. 80 dollars plus shipping message me or call 409-781-1325...
Looks real good Tony,I know you are proud of it
Many years ago on the last day headed to the parking lot at Disney world my response to some question I was asked was TEE TEE on Mickey Mouse....
Quain said you modified some rubber for your front and rear glass, what did you use and is the front and rear glass or lexan?
Melvin was polishing Cromers Friday night at Greer
Looks Great Tony
Its Daves perfection Automotive
You need to take some measurements to see where the engine will locate because my 41 has ax member and all that and firewall mods had to be taker...
Yes I tore the center out of the clutch disc in qualifying. I don't know why I can run the car every where else and something always happens when...
How would you police the use of new parts on say 44 cars at a race and don't say the honor system. There is no honor system in drag racing ....
I have a 42 Studebaker 3 speed overdrive transmission but that was before Stude and Packard were kin
Separate names with a comma.