The Jalopy Journal
The only way to know for sure is to put a set on a flow bench or we are all guessing. the only thing I can say is that if there is more than one...
My thought on the smaller outlet is so all the ports flow the same. I would put 2 inch pipes on bolth and not think to hard about it or find...
Ya make sure to tell them how important you are that always makes people more helpful than they have to be
cannt vote no 0.030, 0.045 or 0.062
What pre 65 fuel injection are you running
Craig Thompson, secretary-designee
Craig Thompson was appointed by Governor Tony Evers to serve [IMG]as secretary of the Wisconsin Department of...
(1) Every motor vehicle originally manufactured after January 1, 1950, every homemade vehicle registered after January 1, 1975, and every vehicle...
Was the car you titled bought in state or from out of state it makes a differance.
michigan is not florida its 20 and snowing here. I would not touch a out of state car without a title they are hard to even scrap oround here.
It seems he cant get it done but we need to praise him as a god anyway because the stuff he has done works great. If you look at almost all of...
ya why would we want to here about bad service they all need to go buyer be ware
The wheel and tires arnt bad but are you keeping the clip job
The reason he still has good feadback is a seller can cancel the order and you cannot leave feedback
If it was mine I would be looking for a set of top and bottom brackets from a 50-54 chevy truck they angle forward and mount almost like what you have
do a leak down test sounds like a valve guide/seat problem some times it hits better than others giving you odd readings or it could be a cam lobe
you could try here I got the new wip and tig filler through them www.usaweld.com/HTP-MIG-160-Gun-Parts-s/307.htm
Use a wet blaster and swing a big hose
Your buick starts with a cummins and ends with an ls throw in a clip job for fun and I might be able to guess why its a ghost town.
That may depend on if you did it or got screwed by someone you paid to do it for you
Ya missed the 40-50 group we must not count
There are two sides to every story we are only getting one. Everyone blames the shop for every thing then complains when there are no more shops....
If this is the one you need message me an adress and I will send it to you[ATTACH]
glad you got it figured.
Its the water pump and pulleys and brackets the balanser should be in the same place use the original 327 stuff on it
Unless it the tech guy at the track then smile and tell him they are stronger than they look
more info would help what 327 what 5 speed did you rebuild it or get it that way. plain jane with a t5 around here you would be lucky to get 2000
more spring presure and room for lift
Where are you I would find someone to widden the seat a little.
way more than i thought it would be
Separate names with a comma.