The Jalopy Journal
36 5w roof $450
36 uncut front wishbone $125
36 rh drive spindles $75
36 rh drive clutch brake pedals $75
36fr shocks good for rebuild $50 pr
Thanx for all the input on 38 Dodge front end guys.
Have a 38 Dodge pickup want to use stock front springs & axle . Whats the best way to lower the front end? Thanx
Anybody out there than are using flowtech or tru-ram headers? any issues? plug wires cooked, plug access. fit? I'm looking to put them on a 350 w/...
Again, Any suggestions on a decent pusher fan in a 36 ford running a 350/350 stock motor? I know there are pro'& cons & preferences. Any help...
Thanx for the input guys
Has anyone out there used a mustang clutch cable & quadrant for a Chevy clutch?
I guess I misposted what I need but what I want to know is what are the best block huger headers for sbc vortec heads.# 5&3 & 6&4 plugs are...
What port configuration should I use vortec heads? Also the distance between #5&3 &
6&4 cyl. are closer toward the center than stock heads.
What is the large hole for in the center of the 36 ford header panel above the windshield? Sunvisors also attach to it.
Any Aussie Hambers out there that would like to communicate? I'm currently building a 36 Ford Ute coupe. Converted to LHD.
Can anyone identify what this axle came from??
Any of you hambers try rust removal using molasses & water? No joke! they use this method in Australia & NZ. 7 parts water 1 part molasses. 5 gal...
To the guy who was looking for some I have a rear door with partial wood your welcome to come have a look Roger
Any Hambers in N.H. know someone who punches louvers locally ?
Thanx to all of you to responding to my grease seal post Roger
Has any of you guys or gals figured out or crossed reference the inner grease seals for 72 chevy rotors on 37- 40 ford spindles? Sick of sending...
Has anyone dealt with bead dies by Fiddy? I cant seem to reach them by the phone # listed & they are not responding to my post.
Hi Hambers, Want to keep mice & critter out of your ride? Try Fresh Cab rodent repellent.Farmers & Mainer's have been using it for years.Available...
Building 38 dodge pu with a hemi.It will have the beam axle with 1/4 eliptic springs (stock) Have seen a couple but have never had the chance to...
Pics aren't in order ,A whole lot of work ahead will be well worth it as its a rare bird. I guess were all gluttons for punishment but what the...
If I put a 36 ford body on a 40 ford frame, what vin do I title the car as? stumped in Ma.
clutch & brake pedal assy $175.00
Spindles exc. brg surfaces & thds $175.00
Throttle pedal worn spoon $30.00...
Has any one dealt with them? looking to replace frame on !936 ford coupe.Going to use solid axle
Still need info on installing tubular x-member in my 36 ute thanx
Has anyone out there used the Speedway tubular center x- member in a 36 ford? Any suggestions or tips would be appreciated
Has anyone used the Speedway 35-40 tubular x-member. Suggestions & tips please.
Separate names with a comma.