The Jalopy Journal
Good to see you back on this thread Herb. Thanks for the advice.
A couple of Chev 4 specials for sale
loving that spring mount Greg
I snapped this one at Gaydon last year. Think it has the US continental motor.
yea my cut off date for all parts on this build has been 1928
Rad surround is a little obscure - Snub nose Morris commercial from mid 1920s - the passenger version better known by the bullnose rad and...
This could be the slowest build on the HAMB
Sent from my SM-G930F using The H.A.M.B. mobile app
Hard to believe it has been nearly 6 years since I started this thread and 2 years since I last looked at it. A few other projects had pushed...
Great location. great event. Hope it is on next year when I am over next.
Not sure Stueee - I will find out.
Would be interesting to know if pumps from early Vauxhall or Bedford 6 could be used. Were they not an...
Pics & some more info on my build.
The chap doing the engineering work for me has successfully raced a 1923 chev for many years so am following...
Am not sure what they are off. They were fitted to numerous British cars from the 1920s on. These are 1 & 1/8 brass bodies and float bowls from...
I have the gearbox snugged on at mo but will take some pics soon. I had flywheel skirt machined off to clutch surface, counter sunk the crank...
For the Australasians amoung us - I have successfully fitted a Holden HQ clutch & pressure plate to my considerably lightened chev four flywheel....
That's a bargain !
do you have an ebay link Bob
Its 1100cc JAP twin drove through a Riley gearbox. The body was leathercloth covered plywood. In 1939 he began to stretch it to a four-seater. It...
yep John Gerber copy but without the chev 4 engine
If you ever wondered where all the Austin A30s went ...
There are few cars that can stand up to a piano accompaniment
Give that film an Oscar
reminds me of the Schneider trophy supermarine
Yep am in New Zealand - but wouldn't be as expensive to send to Brexit Island than other way around. pm me if you are interested.
I also have a set of standard 261 pistons for sale if anyone is interested.
apparently the Egge replacement pistons for Chev 4 are 0.125 higher than standard - same as 261 pistons.
A nice chev 4 in ford chassis build for sale in the UK.
It took a bit of searching but I found Herb's post on the topic. I will drill a couple of holes in my olds head and hope I don't hit...
[ATTACH] Question about using olds head.
So I am about to fit a 3 port olds head to my 1927 chev block and note two water jacket holes at the rear...
Jappic at Brooklands
Separate names with a comma.