The Jalopy Journal
Thanks guys, Im running 35/36 radius rods, and do plan on running a torque arm..
Hey guys, Im thinking about using the piece I cut off when I split the front wishbones, to attach the rear radius rods together and then using...
thanks for the help guys, i really appreciate it..
I guess Im fixen to tackle Pruning the case now that I know its ok, , this should be fun .....
Eddy, do you know where I can get information and specs on where and how to check for clearances ?
Thanks ronnie, crazy that dirt could do that ..
Eddy, there where shims behind the right side gear, I zip tied them to the gear for now .. its going on a 286 flathead .
Thanks 270ci .
Thanks everyone for the replies,
driving the rotor shafts from the rear worked,
I know the scratches in the case suck, Im just not sure how bad...
I got those out already, guess I called them Fastening screws ..
Hey guys, Im trying to take a 471 roots blower apart, I took the end covers off, took the fastening screws, 2 pur bearing plate, the bearing...
Up for sale, I have a very nice 1950 Dodge pickup ..
This old pickup has never been wrecked and has no rust, other than the Panina you see on it,...
Thank you too all you guys for taking time to post …
Damn blowers are sexy on a flathead ..
Hey guys, I was looking for some thoughts on heads and head bolts..
I was debating running stock iron heads, like some merc low compression heads,...
sure wish that shop was close to me lol
Hey guys, Ive been trying to locate glass patterns for a Ford 34 3 window, just need the patterns, have a great glass guy already ..
hey alchemy, that's the plan, I do have some coupe panels and they are far from the same, the belt line stops short, and the rear of the panel...
Hey guys, Im replacing the fender wells on a 34 tudor cdan, first off, I cant locate any that fit the car, Im told no one makes cdan fender wells,...
What tail lights are those hotrodman ?
That car is beautiful Jim, thanks for the input,
Hey guys, I was just wondering how many people actually run the stock location fuel tanks on a 33 / 34 ?
I have my first 34 and I sure like the...
Thanks AngleDrive, very much ..
I need 12 inch long pieces ..
Thanks 31aford, just what Im looking for, now If I could find some frame ends, lol ..
Hey guys, I just acquired a 34 3 window and am looking for some parts, Id appreciate a point or two in the right direction finding a few things.....
Hey guys, I need some help with the floors on a 34 tudor sedan.
The bottom of the car is pretty much gone so I don't have much to work with.
This is the real deal guys, this is a all steel, purpose built race car,
Built in the mid 70s, here in Oak Cliff at uncle Danials old car factory,...
thanks guys, I was leaning towards Ross, just bought a set ..
Hey guys, Im looking for pistons for a blown flathead, Im looking at Ross, are there any other good quality pistons I should consider ?
Damn, its been 5 years already, I remember Kev building that pickup..
I also love what you have done with the pickup, its always nice to put a...
Separate names with a comma.