The Jalopy Journal
The Crowd Roars - James Cagney!! Great movie - TCM 7 minutes.
Tonite @ 8:00 Indy time on TMC.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Just turned 39,000 miles last weekend - she runs and...
I am thinking of converting over to a 1 wire alternator on my '52 Ford V8 flathead - Mac's, Speedway, etc offer these conversion kits and I would...
I just bought one -a 4 doors for the ease of hauling the family. Show me some '52-54 that have some custom touches done to them please. Thanks
I know the Aero Star springs work on '49-'51, but how about '52-54 to lower the front. And do you get 2" or ??
Whats the average shop going to charge to do a complete re-wire on a '54 Ford - convert to 12v.
I'm looking at a '54 Vicky with a Y block. Don't know a thing about them, so help is needed on what to look for and what to expect. Thanks
What's the best color / finish to go with on a less than perfect body.
When did baby moons come on the scene, and didn't narrow white walls show up about 1959?
90 Amp Flux Wire Welder 120V
to be used for very small jobs on car - filling holes, etc
anyone have one of these - opinion please - thx
Did anyone go and take pictures?
How many cars are in the show, in how many buildings. Also isn't there an outside shows too?
Movies were on TV last nite - only reason I watched was his A roaster - a real killer - looks like a pro built. Anyone know anything about it -...
Anyone besides Junior Conway run 560x15 on all 4 corners - if so whats the issues - ride - handling like?
What are the signs of a cracked head or bad head gasket.
The problem I'm having is coolant keeps going into the catch can.
I'm not over filling...
Any hot news or pictures yet?
I've got a '50 shoebox with a stock flathead V8 - how high RPM tach should I buy?
Found in my steel scrap pile some 2 x 3 x 6" long 1/4" wall steel tubing, and I wandered if it could be used as lowering blocks on my shoebox....
I'm sure there's a few guys out there that can answer this question - what car did the head light trim rings come off of? Thanks
I got these off Ebay - they are not as rusty as the picture shows - got some decent chrome under the rust - I've used white vinegar on stainless...
Hey guys I got a red light I can put in place of the yellow one - what do you think? Does anyone one know if I will get in trouble with the...
These are on Ebay - I've see some before, but I don't think I've ever see this type of lake pipe on a car - does anyone have some pictures?
This is not making any sense. My '50 Ford with the flathead V8 is acting rather strange. A couple weeks ago I changed the coolant after removing...
I want to drop the front end a little more - already cut 1 full coil (stock springs) - I heard once that you should not cut too much of the second...
Do we have a winner yet?
I don't know if this news has already been posted, but some of the filming has been done here in Greenwood & Franklin, IN. Local cars have been...
I want to put lake pipes on, but I want them frenched. I've seen fiberglass pieces sold, but don't remember where/who. Also I don't think I've...
I had too much to do around the house and couldn't make it - any pictures??
I have not seen any pixs from this years shows, I know the weather sucks, but Friday was great (I was there). Any one?
Separate names with a comma.