The Jalopy Journal
Thanks for all the input! I guess I’ll stick with the conventional method and maybe try the wire wheel down the road on something less valuable.
I use a wire often at work. Doesn’t seem to make much heat so looking for alternatives to stripe paint that’s all thanks
So as the title suggests! How many of you guys or any at all use a wire wheel on a 4”or 6” grinder to strip your cars? What are the pros and cons...
Just came across this build! Love some 53-54 Chevs! Subscribe
With that stock balancer did are you able to make true tdc? Making sure the outer didn’t rotated on the inner? Just another thought
I’m in a similar process. Not sure if you watch engine masters on you tube but they did a dyno session rockers non roller to full roller 1.5 to...
Huge player in top fuel! For sure will be missed by all
Thank you gentlemen! I was unsure if there is a scientific mathematical number that needs hit! Thanks
When using a adjustable proportioning valve what pressure do you set the back at?
[ATTACH] [ATTACH] very clean complete rear end. Spins freely. It looks to have an open center section. Can meet with in reason.
235 shipped to the Continental US
brand new set of scat I beam 5.7 large journal rods press pin still in plastic can ship on your dime
I also have a set hand made lake side headers ill throw in
pair of Jonny benson sr qc side bells for a large (12hole) quick change set up for a live axle.
can create up and meet with in reason
Unfortunately here in Indiana no matter if the car came with belts or not it is required. I have lap belts in the cars now. Looking to upgrade...
such a great show! just like rod&kustom it stinks to see things come to a end
mattmann527 that sounds like good combo. Depending on your overall tire size I'm sure you wanted you could change the ring gear out if you wanted
427 Sleeper Hahahaha happy New Years too you as well!
427sleeper you are a 100 percent correct on everything! I was just stating I’ve had good luck with them.
I’m sure I’ll catch some flack over this but I use a manual clutch level in these trans. I cut a hole on the side of bellhousing and and a plate...
427sleeper is correct about the size. I had the heavier nv3500 behind a built 350 in a 69 c10. (Much heavier) not once did I have an issue with...
I can get you some pics later. I just pulled out a 261 with t5 and swap in a 327 w/ nv 3500. They fit nicely other the shifter being a little far...
Some really nice craftsmanship here! I would like to learn more about gas welding! It may be old tech but its nice to have options when tools are...
I really enjoy out the box thinking! It is to easy to order something! But there is no craftsmanship to buying it! A buddy of mine had a similar...
Separate names with a comma.