The Jalopy Journal
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Hi , does anybody know what engine/Transmissin adapters are these?
I have them laying ariund forever...
I am from Germany and we made the deal, for sure.
Maybe i mixed it up with my closed drive 37 buick that i am useing at the moment
Hi Frank, the transmission is still waiting to be used.... but it was a,Hildebrandt adapter.
I have an open drive QC for it and a 35-36 rear end
What kind blower do you run? Eaton M ?
The spikes can be the problem with a generator , not the Voltage .
I would not have any worries with Stromberg parts
They stand behind their products
The 112 LSA may help a little , but i am still not sure it makes so little boost with the small 255ci engine
Your new cam must have less overlap to make more boost at low rpm than the L-100 cam .
Is this the case ?
I really dont think your problem is...
Wow, nice !!!!
New Product from them ?
You gonna chrome them ?
If you dont mind the question....how much are they?
I run a 304ci engine with 0.3 thousand and it doesnt detonate.....(yeah , tight... .4-.5 would be perfekt)
Proper timing ....
I bet ignition and...
Yeah i understand :)
I have a second hand set 4-71 . 12psi
Yep! , i agree
Hi Ron , i am still waiting for some cam spec details :)
Hmmmm , a lot of people seem to have problems making boost with the h&h blowers ...their pulleys should have a ratio to make boost at a certain...
What is a 2.3l blower?which car does
It come from?
Will you share the cam specs with us ?
How tall is the TR Design blower intake?
So you are swiching classes .
Very clever :)
Record is much lower than in the Roadster Class
Getting the coupe to 100mph is a challenge...
Found it , but i have apple/safari
So no help there
Cool,do you have the link to the thread?
What a good looking Hot Rod!!!
Damm , all of your build pics are gone....:(
Could you bring them up again,please?
What are the specs on the camshaft?
Hi Daniel ,do you know a source for a g28t engine for sale?
I like to build a 4-banger...
Very cool Hot Rod!!!!!
How much is it chopped?
Where did you buy the front brake hoses from?
1.5 valves are enough and dont relieve the block....
In my option a Max1 is wasted money.
The i would rather have a stock merc cam....
Any more technical details about the old channeld one?
Ok... the potvin 3/8 is too big. No torque below 2800 rpm (there it kicks in)
I would use an isky 1007b from Pete here on the Hamb .
And i would...
I really like that you really test that.
Cant wait to see the results.
In theory it should run better as it should breath better
Separate names with a comma.