The Jalopy Journal
Sorry it was a 366.
If the 454 is a tall deck it's not worth much. See people try to give away running engine no one wants tall deck block. The crank is all that's...
I don't remember what cam . No I did not boost reference. If I did it again I would, boost reference sounds like a better way. I started out with...
By the way , this was on a Pontiac.
I used 1850 straight on a 6-71 . They worked great. I bought secondary spring kits, big pump kit , cam kit for pumps and squirters . Always need...
Holley 4777 and 4779 have the right float bowls for side ways mount. The holley 1850 float bowls are for straight mounting. 1850 will slosh gas...
Take out sparkplug and check stroke. 400 and 428 same bore .
A curtain brand of oil pump has been known to have chips in them. Most Pontiac engine builders disassemble oil pump and clean and lubes.
I would take it back to machine shop as is and show them .
If there are big cast iron chips , that's from boring cylinders. Someone did not clean very well after all machining was done. The crank was just...
Make sure you have pontiac lifters not Chevy lifters. They will fit but not oil right.
What 455 ? Pontiac 455 has 3 1/4 main diameter. They need around .003 clearance. They don't like high rpm. Just watch your oil pressure and run it .
I know Steve Olson that built and raced this car. [ATTACH]
Still available from Mooneyes
You may have hydauliced the cylinder with oil and WD40 and blow a head gasket.
1948 International KB 1 sold it early 2000's. It went to Bakersfield Ca. Now I'm looking for it ,I would like to see if I can buy it back.
You must not know how to solder and how low the temp is.
How about low temp soft solder and map gas torch .
When you bend metal it work hardens. If you want to bend it again , it will need to be annealed.
Yes super duty. Miss typed HO
Pistons don't melt because there water and oil cooled. Take away the water and oil and see what happens. Heads are air and water cooled. Samething
1963 Pontiac HO 421 had factory cast aluminum headers. Did not work very well. They will melt.
If you would like a quote or have questions for custom velocity stacks, or velocity stacks in...
Take a look at this injection. Read about how to tune and it's the same as what I'm talking about....
Mechanical fuel injection will work on the street. The way it's set up is for wide open throttle and ideal. So let's look at the barrel valve....
I but 2 sleeves in a chevy 348 today.[ATTACH]
Separate names with a comma.