The Jalopy Journal
Ok the 16 inch moves 2500cfm and the 10 inch ones 1600 cfm each. Thanks for the replies.
It's a proper brass and copper one.
Can,t fit a steel fan due to the blower belt etc. It's a little crowded.
Just installed my radiator. I,ve got a 16 inch fan here and I also have 2 x 10 inchers. Dunno whether it's better to run 1 big one or the 2...
Thanks guys. I,ve got a Camaro T5 behind a blown 354 Hemi. Picked it up cheap years ago but don,t think it's going to last very long.
Are the Tremec 5 Speed boxes physically the same size as the BW T5 ?
Great tech. I,ve struggled with the front half of my system but looks like the back half might come together easier with this jig.
My 34 came from Argentina it was right hand drive but only the left hand door had a lock?
Wish mine was as nice as that when I got it.
Me? What did I do? I lost 2 leaves from my model A spring. I had 4 spare ones now only have 2. How can I loose something that big in my shop? Time...
Thanks guys, hope to get on this next week.
I,m building a 34 coupe here with a model A rear spring. I want to raise the back end up about an inch. I have some spare leaves here, was just...
Thanks Paul , great pics. I,m down in Cornwall.
Mine has this...[ATTACH]
Just been playing around with one here. Do I need one or no?[ATTACH] [ATTACH]
I shortened the input shaft on mine.
[ATTACH] Nice car , wish mine was that good when I started. I was going to chop mine 5” but chickened out and ended up at 4 1/4.
A motor has a plug on it that goes into a socket on the wall.
Tudor here,s a pic of the crossover without the blower belt etc in the way.I got it off ebay a couple years ago, the guy I got it from was making...
How many run a 2" blower drive?.I ran a 2" belt and pulleys on a blown 350 Chevy for years. Just fitting the same to my Hemi.[ATTACH]
Cool. Keep us posted.
The shaft is now out ready to be machined. We have plenty of engagement between the pilot bearing and shaft.
Looking at the Hotheads site I see that the adapter info says Hemi to Chevy manual It does not say Hemi to WC T-5. The T-5 needs a...
Great info on here as usual , thanks to everyone for chiming in. My shaft is the shortest one at 6 1/2”(measured from the box to the end of the...
No I tried it without the clutch fork so I could look inside and the end of the splines are touching the flywheel.
[ATTACH] When bolting my T5 up to my Hemi I found that the box stops about 1/4” away from the trans adapter, the input shaft is tight against the...
Thanks for that. I tapped the threads because I didn,t fancy fiddling with nuts & bolts.
My 354 crank is tapped for 1/2 unf bolts. How tight do these need to be? I found the torque specs for everything else but not the flywheel bolts.
Separate names with a comma.